#2025-103501 EP

📋 Project Description

Install the Cutler Hammer FD3150 circuit breaker and twin bus hardware kit into panel HA2-2. Mount the 75 KVAR capacitor across the room on the wall and above the 45 kva transformer. Furnish install and connect (1)1-1/2¿ raceway with three 1/0 phase wires and one #6 ground wire. Use existing wireway as much as practical. Label the circuit breaker and capacitor. Record measurements before and after on capacitor measurement sheet. Energize the capacitor measure and record the amperage on each phase.