Construction complete · Aug 2009🏁Project Closed🔧 Renovation/Alteration💵 This project involves public funds, public land, or is a Federally funded roadway project.

GATE MILLWORK REPLACEMENT TERMINALS A&C

INTERNATIONAL PARKWAY, Dfw Airport, TX 75261, Dfw Airport, TX, 75261

GATE MILLWORK REPLACEMENT TERMINALS A&C is a renovation/alteration project at INTERNATIONAL PARKWAY, Dfw Airport, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Aug 2009). The project has an estimated value of $995K.

Completed100%

📊Project Metrics

TDLR #EABPRJA9809188

$995K

Project Value

—

Square Feet

—

Cost/SqFt

5 months

Duration

Registered:Mar 6, 2009

Start:Mar 1, 2009

Target:Aug 1, 2009

🏁

Project Closed

Project has been completed and closed

GATE MILLWORK REPLACEMENT TERMINALS A&C is a Renovation/Alteration project located at INTERNATIONAL PARKWAY, Dfw Airport, TX 75261 in Dfw Airport, Texas. The project has an estimated value of $995K. DFW INTERNATIONAL AIRPORT is the property owner. The project was registered with TDLR on March 6, 2009.

❓Frequently Asked Questions

What is GATE MILLWORK REPLACEMENT TERMINALS A&C?

GATE MILLWORK REPLACEMENT TERMINALS A&C is a renovation/alteration project at INTERNATIONAL PARKWAY in Dfw Airport, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Install new gate counters at boarding areas.

Is GATE MILLWORK REPLACEMENT TERMINALS A&C open in Dfw Airport?

Construction on GATE MILLWORK REPLACEMENT TERMINALS A&C is complete — TDLR records show the project passed its required accessibility inspection in Aug 2009. The building is finished and very likely open.

Where is GATE MILLWORK REPLACEMENT TERMINALS A&C located?

GATE MILLWORK REPLACEMENT TERMINALS A&C is located at INTERNATIONAL PARKWAY, Dfw Airport, TX, 75261, in Dallas County.

Who is the owner or developer of GATE MILLWORK REPLACEMENT TERMINALS A&C?

DFW INTERNATIONAL AIRPORT is the property owner/developer of record for GATE MILLWORK REPLACEMENT TERMINALS A&C, per its TDLR project registration.

How much does GATE MILLWORK REPLACEMENT TERMINALS A&C cost and how big is it?

GATE MILLWORK REPLACEMENT TERMINALS A&C has an estimated construction value of $995K, based on its TDLR filing.

📋Scope of Work

Install new gate counters at boarding areas.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.