Construction complete · Sep 2009🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

CALIBRATION FACILITY

651 NORTH BURLESON BLVD, Burleson, TX 76028, Burleson, TX, 76028

CALIBRATION FACILITY is a new construction project at 651 NORTH BURLESON BLVD, Burleson, in Johnson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Sep 2009). The project has an estimated value of $350K.

Completed100%

📊Project Metrics

TDLR #EABPRJA9809603

$350K

Project Value

—

Square Feet

—

Cost/SqFt

5 months

Duration

Registered:Mar 16, 2009

Start:Apr 1, 2009

Target:Sep 1, 2009

🏁

Project Closed

Project has been completed and closed

CALIBRATION FACILITY is a New Construction project located at 651 NORTH BURLESON BLVD, Burleson, TX 76028 in Burleson, Texas. The project has an estimated value of $350K. HALLIBURTON is the property owner and JCW is the design firm of record. The project was registered with TDLR on March 16, 2009.

❓Frequently Asked Questions

What is CALIBRATION FACILITY?

CALIBRATION FACILITY is a new construction project at 651 NORTH BURLESON BLVD in Burleson, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: metal building / shop

Is CALIBRATION FACILITY open in Burleson?

Construction on CALIBRATION FACILITY is complete — TDLR records show the project passed its required accessibility inspection in Sep 2009. The building is finished and very likely open.

Where is CALIBRATION FACILITY located?

CALIBRATION FACILITY is located at 651 NORTH BURLESON BLVD, Burleson, TX, 76028, in Johnson County.

Who is the owner or developer of CALIBRATION FACILITY?

HALLIBURTON is the property owner/developer of record for CALIBRATION FACILITY, per its TDLR project registration.

Who is the architect or design firm for CALIBRATION FACILITY?

JCW is the design firm of record for CALIBRATION FACILITY, according to its TDLR filing.

How much does CALIBRATION FACILITY cost and how big is it?

CALIBRATION FACILITY has an estimated construction value of $350K, based on its TDLR filing.

📋Scope of Work

metal building / shop

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.