Construction complete · Jun 2010🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

GENERAL INDUSTRIAL POLYMERS

N.E. CORNER SPUR 330 AND WADE, Baytown, TX 77520, Baytown, TX, 77520

GENERAL INDUSTRIAL POLYMERS is a new construction project at N.E. CORNER SPUR 330 AND WADE, Baytown, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jun 2010). The project has an estimated value of $1.5M.

Completed100%

📊Project Metrics

TDLR #EABPRJA9815400

$1.5M

Project Value

—

Square Feet

—

Cost/SqFt

6 months

Duration

Registered:Jul 23, 2009

Start:Dec 1, 2009

Target:Jun 1, 2010

🏁

Project Closed

Project has been completed and closed

GENERAL INDUSTRIAL POLYMERS is a New Construction project located at N.E. CORNER SPUR 330 AND WADE, Baytown, TX 77520 in Baytown, Texas. The project has an estimated value of $1.5M. GENERAL INDUSTRIAL PLOYMERS is the property owner and HUTCHISON & ASSOCIATES is the design firm of record. The project was registered with TDLR on July 23, 2009.

❓Frequently Asked Questions

What is GENERAL INDUSTRIAL POLYMERS?

GENERAL INDUSTRIAL POLYMERS is a new construction project at N.E. CORNER SPUR 330 AND WADE in Baytown, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 140'X300' Metal Bldg. with a 50'X65' office area to be used as a distribution center for product.

Is GENERAL INDUSTRIAL POLYMERS open in Baytown?

Construction on GENERAL INDUSTRIAL POLYMERS is complete — TDLR records show the project passed its required accessibility inspection in Jun 2010. The building is finished and very likely open.

Where is GENERAL INDUSTRIAL POLYMERS located?

GENERAL INDUSTRIAL POLYMERS is located at N.E. CORNER SPUR 330 AND WADE, Baytown, TX, 77520, in Harris County.

Who is the owner or developer of GENERAL INDUSTRIAL POLYMERS?

GENERAL INDUSTRIAL PLOYMERS is the property owner/developer of record for GENERAL INDUSTRIAL POLYMERS, per its TDLR project registration.

Who is the architect or design firm for GENERAL INDUSTRIAL POLYMERS?

HUTCHISON & ASSOCIATES is the design firm of record for GENERAL INDUSTRIAL POLYMERS, according to its TDLR filing.

How much does GENERAL INDUSTRIAL POLYMERS cost and how big is it?

GENERAL INDUSTRIAL POLYMERS has an estimated construction value of $1.5M, based on its TDLR filing.

📋Scope of Work

140'X300' Metal Bldg. with a 50'X65' office area to be used as a distribution center for product.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.