Construction complete · Dec 2011🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

THOMAS TOOLS

4127 COUNTY ROAD 34, Robstown, TX 78380, Robstown, TX, 78380

THOMAS TOOLS is a new construction project at 4127 COUNTY ROAD 34, Robstown, in Nueces County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2011). The project has an estimated value of $1.2M.

Completed100%

📊Project Metrics

TDLR #EABPRJB1814859

$1.2M

Project Value

—

Square Feet

—

Cost/SqFt

4 months

Duration

Registered:Jul 8, 2011

Start:Aug 1, 2011

Target:Dec 1, 2011

🏁

Project Closed

Project has been completed and closed

THOMAS TOOLS is a New Construction project located at 4127 COUNTY ROAD 34, Robstown, TX 78380 in Robstown, Texas. The project has an estimated value of $1.2M. THOMAS TOOLS is the property owner and NAISMITH ENGINEERING INC. is the design firm of record. The project was registered with TDLR on July 8, 2011.

❓Frequently Asked Questions

What is THOMAS TOOLS?

THOMAS TOOLS is a new construction project at 4127 COUNTY ROAD 34 in Robstown, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construction of a 34' x 100' pre-engineered metal building to house a industrial machine shop, office, and restr

Is THOMAS TOOLS open in Robstown?

Construction on THOMAS TOOLS is complete — TDLR records show the project passed its required accessibility inspection in Dec 2011. The building is finished and very likely open.

Where is THOMAS TOOLS located?

THOMAS TOOLS is located at 4127 COUNTY ROAD 34, Robstown, TX, 78380, in Nueces County.

Who is the owner or developer of THOMAS TOOLS?

THOMAS TOOLS is the property owner/developer of record for THOMAS TOOLS, per its TDLR project registration.

Who is the architect or design firm for THOMAS TOOLS?

NAISMITH ENGINEERING INC. is the design firm of record for THOMAS TOOLS, according to its TDLR filing.

How much does THOMAS TOOLS cost and how big is it?

THOMAS TOOLS has an estimated construction value of $1.2M, based on its TDLR filing.

📋Scope of Work

Construction of a 34' x 100' pre-engineered metal building to house a industrial machine shop, office, and restr

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.