Construction complete · Apr 2012🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

FW EXTRUSION PROJECT

4324 FLEETWOOD ROAD, Fort Worth, TX 76155, Fort Worth, TX, 76155

FW EXTRUSION PROJECT is a renovation/alteration project at 4324 FLEETWOOD ROAD, Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Apr 2012). The project has an estimated value of $200K.

Completed100%

📊Project Metrics

TDLR #EABPRJB2804487

$200K

Project Value

—

Square Feet

—

Cost/SqFt

4 months

Duration

Registered:Dec 6, 2011

Start:Dec 1, 2011

Target:Apr 1, 2012

🏁

Project Closed

Project has been completed and closed

FW EXTRUSION PROJECT is a Renovation/Alteration project located at 4324 FLEETWOOD ROAD, Fort Worth, TX 76155 in Fort Worth, Texas. The project has an estimated value of $200K. HOLT LUNSFORD COMMERCIAL is the property owner and AMCOR RIGID PLASTICS is the design firm of record. The project was registered with TDLR on December 6, 2011.

❓Frequently Asked Questions

What is FW EXTRUSION PROJECT?

FW EXTRUSION PROJECT is a renovation/alteration project at 4324 FLEETWOOD ROAD in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: addition of manufacturing capabilities to existing manufacturing facility

Is FW EXTRUSION PROJECT open in Fort Worth?

Construction on FW EXTRUSION PROJECT is complete — TDLR records show the project passed its required accessibility inspection in Apr 2012. The building is finished and very likely open.

Where is FW EXTRUSION PROJECT located?

FW EXTRUSION PROJECT is located at 4324 FLEETWOOD ROAD, Fort Worth, TX, 76155, in Tarrant County.

Who is the owner or developer of FW EXTRUSION PROJECT?

HOLT LUNSFORD COMMERCIAL is the property owner/developer of record for FW EXTRUSION PROJECT, per its TDLR project registration.

Who is the architect or design firm for FW EXTRUSION PROJECT?

AMCOR RIGID PLASTICS is the design firm of record for FW EXTRUSION PROJECT, according to its TDLR filing.

How much does FW EXTRUSION PROJECT cost and how big is it?

FW EXTRUSION PROJECT has an estimated construction value of $200K, based on its TDLR filing.

📋Scope of Work

addition of manufacturing capabilities to existing manufacturing facility

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.