Construction complete · Apr 2012🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

MEDTRONIC MANUFACTURING AREA REMODEL

4620 N. BEACH STREET, Fort Worth, TX 76137, Fort Worth, TX, 76137

MEDTRONIC MANUFACTURING AREA REMODEL is a renovation/alteration project at 4620 N. BEACH STREET, Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Apr 2012). The project has an estimated value of $80K.

Completed100%

📊Project Metrics

TDLR #EABPRJB2808886

$80K

Project Value

—

Square Feet

—

Cost/SqFt

1 months

Duration

Registered:Mar 5, 2012

Start:Mar 1, 2012

Target:Apr 1, 2012

🏁

Project Closed

Project has been completed and closed

MEDTRONIC MANUFACTURING AREA REMODEL is a Renovation/Alteration project located at 4620 N. BEACH STREET, Fort Worth, TX 76137 in Fort Worth, Texas. The project has an estimated value of $80K. MEDTRONIC INC. is the property owner. The project was registered with TDLR on March 5, 2012.

❓Frequently Asked Questions

What is MEDTRONIC MANUFACTURING AREA REMODEL?

MEDTRONIC MANUFACTURING AREA REMODEL is a renovation/alteration project at 4620 N. BEACH STREET in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Add wall to manufacturing area, doors, new ceiling, paint, electrical, floor coating.

Is MEDTRONIC MANUFACTURING AREA REMODEL open in Fort Worth?

Construction on MEDTRONIC MANUFACTURING AREA REMODEL is complete — TDLR records show the project passed its required accessibility inspection in Apr 2012. The building is finished and very likely open.

Where is MEDTRONIC MANUFACTURING AREA REMODEL located?

MEDTRONIC MANUFACTURING AREA REMODEL is located at 4620 N. BEACH STREET, Fort Worth, TX, 76137, in Tarrant County.

Who is the owner or developer of MEDTRONIC MANUFACTURING AREA REMODEL?

MEDTRONIC INC. is the property owner/developer of record for MEDTRONIC MANUFACTURING AREA REMODEL, per its TDLR project registration.

How much does MEDTRONIC MANUFACTURING AREA REMODEL cost and how big is it?

MEDTRONIC MANUFACTURING AREA REMODEL has an estimated construction value of $80K, based on its TDLR filing.

📋Scope of Work

Add wall to manufacturing area, doors, new ceiling, paint, electrical, floor coating.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.