Construction complete · Jul 2012🏁Project Closed🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

BTM MACHINING, LLP

15637 ENNIS ROAD, Sugar Land, TX 77498, Sugar Land, TX, 77498

BTM MACHINING, LLP is a additions to existing building project at 15637 ENNIS ROAD, Sugar Land, in Fort Bend County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jul 2012). The project has an estimated value of $855K.

Completed100%

📊Project Metrics

TDLR #EABPRJB2812518

$855K

Project Value

—

Square Feet

—

Cost/SqFt

2 months

Duration

Registered:May 7, 2012

Start:May 1, 2012

Target:Jul 1, 2012

🏁

Project Closed

Project has been completed and closed

BTM MACHINING, LLP is a Additions to Existing Building project located at 15637 ENNIS ROAD, Sugar Land, TX 77498 in Sugar Land, Texas. The project has an estimated value of $855K. PRECISION CAR PARTS CORP is the property owner and ROBERT WALTERS ARCHITECT is the design firm of record. The project was registered with TDLR on May 7, 2012.

❓Frequently Asked Questions

What is BTM MACHINING, LLP?

BTM MACHINING, LLP is a additions to existing building project at 15637 ENNIS ROAD in Sugar Land, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Adding 29,700 s.f. of of 1 story manufacturing and warehouse to existing metal building.

Is BTM MACHINING, LLP open in Sugar Land?

Construction on BTM MACHINING, LLP is complete — TDLR records show the project passed its required accessibility inspection in Jul 2012. The building is finished and very likely open.

Where is BTM MACHINING, LLP located?

BTM MACHINING, LLP is located at 15637 ENNIS ROAD, Sugar Land, TX, 77498, in Fort Bend County.

Who is the owner or developer of BTM MACHINING, LLP?

PRECISION CAR PARTS CORP is the property owner/developer of record for BTM MACHINING, LLP, per its TDLR project registration.

Who is the architect or design firm for BTM MACHINING, LLP?

ROBERT WALTERS ARCHITECT is the design firm of record for BTM MACHINING, LLP, according to its TDLR filing.

How much does BTM MACHINING, LLP cost and how big is it?

BTM MACHINING, LLP has an estimated construction value of $855K, based on its TDLR filing.

📋Scope of Work

Adding 29,700 s.f. of of 1 story manufacturing and warehouse to existing metal building.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.