Construction complete · Jul 2014🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

MICROTESLA CALIBRATION BUILDING

14477 WAGG WAY, Houston, TX 77041, Houston, TX, 77041

MICROTESLA CALIBRATION BUILDING is a new construction project at 14477 WAGG WAY, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jul 2014). The project has an estimated value of $2.0M.

Completed100%

📊Project Metrics

TDLR #EABPRJB4800787

$2.0M

Project Value

—

Square Feet

—

Cost/SqFt

9 months

Duration

Registered:Sep 16, 2013

Start:Oct 1, 2013

Target:Jul 1, 2014

🏁

Project Closed

Project has been completed and closed

MICROTESLA CALIBRATION BUILDING is a New Construction project located at 14477 WAGG WAY, Houston, TX 77041 in Houston, Texas. The project has an estimated value of $2.0M. ANGLING RESOURCES LTD. is the property owner and CASTLES DESIGN GROUP PC is the design firm of record. The project was registered with TDLR on September 16, 2013.

❓Frequently Asked Questions

What is MICROTESLA CALIBRATION BUILDING?

MICROTESLA CALIBRATION BUILDING is a new construction project at 14477 WAGG WAY in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: A new 12,744 sf. ft. single story building with mezzanine for use as a research/testing building for manufacture

Is MICROTESLA CALIBRATION BUILDING open in Houston?

Construction on MICROTESLA CALIBRATION BUILDING is complete — TDLR records show the project passed its required accessibility inspection in Jul 2014. The building is finished and very likely open.

Where is MICROTESLA CALIBRATION BUILDING located?

MICROTESLA CALIBRATION BUILDING is located at 14477 WAGG WAY, Houston, TX, 77041, in Harris County.

Who is the owner or developer of MICROTESLA CALIBRATION BUILDING?

ANGLING RESOURCES LTD. is the property owner/developer of record for MICROTESLA CALIBRATION BUILDING, per its TDLR project registration.

Who is the architect or design firm for MICROTESLA CALIBRATION BUILDING?

CASTLES DESIGN GROUP PC is the design firm of record for MICROTESLA CALIBRATION BUILDING, according to its TDLR filing.

How much does MICROTESLA CALIBRATION BUILDING cost and how big is it?

MICROTESLA CALIBRATION BUILDING has an estimated construction value of $2.0M, based on its TDLR filing.

📋Scope of Work

A new 12,744 sf. ft. single story building with mezzanine for use as a research/testing building for manufacture

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.