Construction complete · Nov 2015🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

DURCO FABRICATION SHOP

KNAUTH ROAD AT TX SPUR 93, Port Arthur, TX 77640, Port Arthur, TX, 77640

DURCO FABRICATION SHOP is a new construction project at KNAUTH ROAD AT TX SPUR 93, Port Arthur, in Jefferson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Nov 2015). The project has an estimated value of $750K.

Completed100%

📊Project Metrics

TDLR #EABPRJB5802615

$750K

Project Value

—

Square Feet

—

Cost/SqFt

1 year

Duration

Registered:Oct 9, 2014

Start:Nov 1, 2014

Target:Nov 1, 2015

🏁

Project Closed

Project has been completed and closed

DURCO FABRICATION SHOP is a New Construction project located at KNAUTH ROAD AT TX SPUR 93, Port Arthur, TX 77640 in Port Arthur, Texas. The project has an estimated value of $750K. DURCO LTD. is the property owner and EDR ARCHITECTS PLLC is the design firm of record. The project was registered with TDLR on October 9, 2014.

❓Frequently Asked Questions

What is DURCO FABRICATION SHOP?

DURCO FABRICATION SHOP is a new construction project at KNAUTH ROAD AT TX SPUR 93 in Port Arthur, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construct a new single story industrial fabrication shop

Is DURCO FABRICATION SHOP open in Port Arthur?

Construction on DURCO FABRICATION SHOP is complete — TDLR records show the project passed its required accessibility inspection in Nov 2015. The building is finished and very likely open.

Where is DURCO FABRICATION SHOP located?

DURCO FABRICATION SHOP is located at KNAUTH ROAD AT TX SPUR 93, Port Arthur, TX, 77640, in Jefferson County.

Who is the owner or developer of DURCO FABRICATION SHOP?

DURCO LTD. is the property owner/developer of record for DURCO FABRICATION SHOP, per its TDLR project registration.

Who is the architect or design firm for DURCO FABRICATION SHOP?

EDR ARCHITECTS PLLC is the design firm of record for DURCO FABRICATION SHOP, according to its TDLR filing.

How much does DURCO FABRICATION SHOP cost and how big is it?

DURCO FABRICATION SHOP has an estimated construction value of $750K, based on its TDLR filing.

📋Scope of Work

Construct a new single story industrial fabrication shop

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.