Project has been completed and closed
TXAPA EXPANSION BUILDING is a Renovation/Alteration project located at 219 COMMERCIAL DRIVE, Buda, TX 78610 in Buda, Texas. The project has an estimated value of $1.5M. HAROLD MULLEN is the property owner and KAMPFE DE STIJL is the design firm of record. The project was registered with TDLR on June 28, 2018.
Interior remodel of existing building
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Jun 28, 2018
Review Complete
Inspection Complete
Closed
Nov 1, 2018
Building permits found at or near this location
Replacement of 3 complete existing central heat and air systems with or without duct work
New 2-Story Condominium. Unit to have (2) Bedrooms (2.5) Bathrooms (1) Attached Garage (1) Uncovered Parking Covered Entry Porch (1) Covered Balcony. Plan Type F: 219 Lessin Lane Building # 5 Elevation R. Building Height 23ft-8ยฟ Maximum Height: 35ft. Required Parking 2. Required FFE: 640.50- above MSL. Site Plan#: SP-2020-0364C. Expiration Date:10/24/2024
New 2-Story Condominium. Unit to have (3) Bedrooms (3.5) Bathrooms (1) Attached Garage(1) Covered Carport (1) Uncovered Parking Covered Entry Porch (1) Uncovered Balcony Uncovered Patio Uncovered Deck Plan Type A: 219 Lessin Lane Building # 9. Building Height 23ft-8รยฟรยฟ Maximum Height: 35ft. Required Parking 3. Required FFE: 639.50- above MSL. Site Plan#: SP-2020-0364C. Expiration Date:10/24/2024
New 2-Story Duplex Condominium. Unit 7A to have (2) Bedrooms (2.5) Bathrooms (1) Attached Garage (1) Attached Covered Carport Covered Entry Porch Uncovered Balcony. Plan Type E Units 7A & 7B: 219 Lessin Lane Building #7A +7B Building Height 25ft-5ยฟ Maximum Height: 35ft. Required Parking 2. Required FFE: 640.5- above MSL. Site Plan#: SP-2020-0364C. Expiration Date:10/24/2024
Electrical service for the irrigation system meter will be attached to the rack service MC1