Construction complete · Dec 2019✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

RYDER

888 E. AIRTEX DRIVE, Houston, TX 77073, Houston, TX, 77073

RYDER is a new construction project at 888 E. AIRTEX DRIVE, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2019). The project has an estimated value of $1.4M across about 23,761 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #EABPRJB8821267

$1.4M

Project Value

23,761

Square Feet

$59/sqft

Cost/SqFt

1y 4mo

Duration

Registered:Jul 10, 2018

Start:Sep 1, 2018

Target:Dec 16, 2019

✅

Inspection Complete

Final inspection completed, awaiting project closure

RYDER is a New Construction project located at 888 E. AIRTEX DRIVE, Houston, TX 77073 in Houston, Texas. The project has an estimated value of $1.4M covering 23,761 sq ft. RYDER SYSTEM INC. is the property owner and BENNETT BENNER PARTNERS ARCHITECTS is the design firm of record. The project was registered with TDLR on July 10, 2018.

❓Frequently Asked Questions

What is RYDER?

RYDER is a new construction project at 888 E. AIRTEX DRIVE in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Renovation of an existing office and shop. Scope includes remodeling of interior office and MEP work. Site scope

Is RYDER open in Houston?

Construction on RYDER is complete — TDLR records show the project passed its required accessibility inspection in Dec 2019. The building is finished and very likely open.

Where is RYDER located?

RYDER is located at 888 E. AIRTEX DRIVE, Houston, TX, 77073, in Harris County.

Who is the owner or developer of RYDER?

RYDER SYSTEM INC. is the property owner/developer of record for RYDER, per its TDLR project registration.

Who is the architect or design firm for RYDER?

BENNETT BENNER PARTNERS ARCHITECTS is the design firm of record for RYDER, according to its TDLR filing.

How much does RYDER cost and how big is it?

RYDER has an estimated construction value of $1.4M and approximately 23,761 square feet (about $59/sqft), based on its TDLR filing.

📋Scope of Work

Renovation of an existing office and shop. Scope includes remodeling of interior office and MEP work. Site scope

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.