Construction complete · May 2019🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Pacific Table

5238 N O'Conner Blvd Suite 136, Irving, TX 75039, Irving, TX, 75039

Pacific Table is a new construction project at 5238 N O'Conner Blvd Suite 136, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2019). The project has an estimated value of $650K across about 5,169 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2019004428

$650K

Project Value

5,169

Square Feet

$126/sqft

Cost/SqFt

3 months

Duration

Registered:Feb 8, 2019

Start:Feb 22, 2019

Target:May 15, 2019

🏁

Project Closed

Project has been completed and closed

Pacific Table is a New Construction project located at 5238 N O'Conner Blvd Suite 136, Irving, TX 75039 in Irving, Texas. The project has an estimated value of $650K covering 5,169 sq ft. Richard Perry is the property owner and Robert Quintana Architects is the design firm of record. The project was registered with TDLR on February 8, 2019.

❓Frequently Asked Questions

What is Pacific Table?

Pacific Table is a new construction project at 5238 N O'Conner Blvd Suite 136 in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Restaurant Build

Is Pacific Table open in Irving?

Construction on Pacific Table is complete — TDLR records show the project passed its required accessibility inspection in May 2019. The building is finished and very likely open.

Where is Pacific Table located?

Pacific Table is located at 5238 N O'Conner Blvd Suite 136, Irving, TX, 75039, in Dallas County.

Who is the owner or developer of Pacific Table?

Richard Perry is the property owner/developer of record for Pacific Table, per its TDLR project registration.

Who is the architect or design firm for Pacific Table?

Robert Quintana Architects is the design firm of record for Pacific Table, according to its TDLR filing.

How much does Pacific Table cost and how big is it?

Pacific Table has an estimated construction value of $650K and approximately 5,169 square feet (about $126/sqft), based on its TDLR filing.

📋Scope of Work

Restaurant Build

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.