Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Lu's Barber Shop

1756 S. Friendswood Dr. Bldg-A, # 200, Friendswood, TX 77546, Friendswood, TX, 77546

Lu's Barber Shop is a renovation/alteration project at 1756 S. Friendswood Dr. Bldg-A, # 200, Friendswood, in Galveston County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $65K across about 1,440 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2019010116

$65K

Project Value

1,440

Square Feet

$45/sqft

Cost/SqFt

7 months

Duration

Registered:Apr 24, 2019

Start:Jul 17, 2019

Target:Feb 15, 2020

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Lu's Barber Shop is a Renovation/Alteration project located at 1756 S. Friendswood Dr. Bldg-A, # 200, Friendswood, TX 77546 in Friendswood, Texas. The project has an estimated value of $65K covering 1,440 sq ft. Luis G. Davila is the property owner and Maxx Designers is the design firm of record. The project was registered with TDLR on April 24, 2019.

❓Frequently Asked Questions

What is Lu's Barber Shop?

Lu's Barber Shop is a renovation/alteration project at 1756 S. Friendswood Dr. Bldg-A, # 200 in Friendswood, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Barber shop-Interior build out

Is Lu's Barber Shop open in Friendswood?

Lu's Barber Shop is currently under construction in Friendswood, TX. Its current TDLR status is "Project Registered".

Where is Lu's Barber Shop located?

Lu's Barber Shop is located at 1756 S. Friendswood Dr. Bldg-A, # 200, Friendswood, TX, 77546, in Galveston County.

Who is the owner or developer of Lu's Barber Shop?

Luis G. Davila is the property owner/developer of record for Lu's Barber Shop, per its TDLR project registration.

Who is the architect or design firm for Lu's Barber Shop?

Maxx Designers is the design firm of record for Lu's Barber Shop, according to its TDLR filing.

How much does Lu's Barber Shop cost and how big is it?

Lu's Barber Shop has an estimated construction value of $65K and approximately 1,440 square feet (about $45/sqft), based on its TDLR filing.

📋Scope of Work

Barber shop-Interior build out

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.