Project has been completed and closed
C&M Cycles is a New Construction project located at 300 Northpark Drive, Suite 500, Kingwood, TX 77339 in Kingwood, Texas. The project has an estimated value of $150K covering 2,545 sq ft. Parkway Partners is the property owner and GM Designs, Inc is the design firm of record. The project was registered with TDLR on May 27, 2019.
C&M Cycles is a new construction project at 300 Northpark Drive, Suite 500, Kingwood, TX 77339 in Kingwood, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New interior improvements for spin cycle studio.
Construction on C&M Cycles is complete — TDLR records show the project passed its required accessibility inspection in Dec 2019. The building is finished and very likely open.
C&M Cycles is located at 300 Northpark Drive, Suite 500, Kingwood, TX 77339, Kingwood, TX, 77339, in Montgomery County.
Parkway Partners is the property owner/developer of record for C&M Cycles, per its TDLR project registration.
GM Designs, Inc is the design firm of record for C&M Cycles, according to its TDLR filing.
C&M Cycles has an estimated construction value of $150K and approximately 2,545 square feet (about $59/sqft), based on its TDLR filing.
New interior improvements for spin cycle studio.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
May 27, 2019
Review Complete
Inspection Complete
Closed
Dec 27, 2019
Need a contractor for this project?
Browse verified general contractors active in Montgomery County
Find General Contractors in Montgomery