UTSW 'NA' Building - Level 3 Office 106 & 110 Renovation is a renovation/alteration project at 5998 Harry Hines Blvd., Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Apr 2020). The project has an estimated value of $133K across about 730 sq ft.
Project has been completed and closed
UTSW 'NA' Building - Level 3 Office 106 & 110 Renovation is a Renovation/Alteration project located at 5998 Harry Hines Blvd., Dallas, TX 75235 in Dallas, Texas. The project has an estimated value of $133K covering 730 sq ft. Juan Guerra is the property owner and FKP | CannonDesign is the design firm of record. The project was registered with TDLR on June 27, 2019.
UTSW 'NA' Building - Level 3 Office 106 & 110 Renovation is a renovation/alteration project at 5998 Harry Hines Blvd. in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior Renovation of Existing Offices NA3.106 and NA3.110. Removal of existing CMU wall, sloped slab and floor sink, doors, frames, flooring, furred walls, ceilings and finishes. Replace with new.
Construction on UTSW 'NA' Building - Level 3 Office 106 & 110 Renovation is complete — TDLR records show the project passed its required accessibility inspection in Apr 2020. The building is finished and very likely open.
UTSW 'NA' Building - Level 3 Office 106 & 110 Renovation is located at 5998 Harry Hines Blvd., Dallas, TX, 75235, in Dallas County.
Juan Guerra is the property owner/developer of record for UTSW 'NA' Building - Level 3 Office 106 & 110 Renovation, per its TDLR project registration.
FKP | CannonDesign is the design firm of record for UTSW 'NA' Building - Level 3 Office 106 & 110 Renovation, according to its TDLR filing.
UTSW 'NA' Building - Level 3 Office 106 & 110 Renovation has an estimated construction value of $133K and approximately 730 square feet (about $182/sqft), based on its TDLR filing.
Interior Renovation of Existing Offices NA3.106 and NA3.110. Removal of existing CMU wall, sloped slab and floor sink, doors, frames, flooring, furred walls, ceilings and finishes. Replace with new.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Jun 27, 2019
Review Complete
Inspection Complete
Closed
Apr 15, 2020
