Construction complete · Jul 2023🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Lennox Dentwood

5502 Denton Dr Cut Off, Dallas, TX 75235, Dallas, TX, 75235

Lennox Dentwood is a new construction project at 5502 Denton Dr Cut Off, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jul 2023). The project has an estimated value of $266K across about 4,728 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2019015015

$266K

Project Value

4,728

Square Feet

$56/sqft

Cost/SqFt

3y 11mo

Duration

Registered:Jun 27, 2019

Start:Sep 1, 2019

Target:Jul 1, 2023

🏁

Project Closed

Project has been completed and closed

Lennox Dentwood is a New Construction project located at 5502 Denton Dr Cut Off, Dallas, TX 75235 in Dallas, Texas. The project has an estimated value of $266K covering 4,728 sq ft. OHT Partners, LLC is the property owner and BGO Architects is the design firm of record. The project was registered with TDLR on June 27, 2019.

❓Frequently Asked Questions

What is Lennox Dentwood?

Lennox Dentwood is a new construction project at 5502 Denton Dr Cut Off in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construction of new multi-family building

Is Lennox Dentwood open in Dallas?

Construction on Lennox Dentwood is complete — TDLR records show the project passed its required accessibility inspection in Jul 2023. The building is finished and very likely open.

Where is Lennox Dentwood located?

Lennox Dentwood is located at 5502 Denton Dr Cut Off, Dallas, TX, 75235, in Dallas County.

Who is the owner or developer of Lennox Dentwood?

OHT Partners, LLC is the property owner/developer of record for Lennox Dentwood, per its TDLR project registration.

Who is the architect or design firm for Lennox Dentwood?

BGO Architects is the design firm of record for Lennox Dentwood, according to its TDLR filing.

How much does Lennox Dentwood cost and how big is it?

Lennox Dentwood has an estimated construction value of $266K and approximately 4,728 square feet (about $56/sqft), based on its TDLR filing.

📋Scope of Work

Construction of new multi-family building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.