Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Ed's Precision Manufacturing

6061 Thomas Road, Houston, TX 77041, Houston, TX, 77041

Ed's Precision Manufacturing is a new construction project at 6061 Thomas Road, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $340K across about 7,200 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2019015716

$340K

Project Value

7,200

Square Feet

$47/sqft

Cost/SqFt

1y 1mo

Duration

Registered:Jul 9, 2019

Start:Aug 1, 2019

Target:Aug 31, 2020

📝

Review Complete

Design review complete, construction may proceed

Ed's Precision Manufacturing is a New Construction project located at 6061 Thomas Road, Houston, TX 77041 in Houston, Texas. The project has an estimated value of $340K covering 7,200 sq ft. Ed DeCora is the property owner and MBC Management is the design firm of record. The project was registered with TDLR on July 9, 2019.

❓Frequently Asked Questions

What is Ed's Precision Manufacturing?

Ed's Precision Manufacturing is a new construction project at 6061 Thomas Road in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New metal building

Is Ed's Precision Manufacturing open in Houston?

Ed's Precision Manufacturing is currently under construction in Houston, TX. Its current TDLR status is "Review Complete".

Where is Ed's Precision Manufacturing located?

Ed's Precision Manufacturing is located at 6061 Thomas Road, Houston, TX, 77041, in Harris County.

Who is the owner or developer of Ed's Precision Manufacturing?

Ed DeCora is the property owner/developer of record for Ed's Precision Manufacturing, per its TDLR project registration.

Who is the architect or design firm for Ed's Precision Manufacturing?

MBC Management is the design firm of record for Ed's Precision Manufacturing, according to its TDLR filing.

How much does Ed's Precision Manufacturing cost and how big is it?

Ed's Precision Manufacturing has an estimated construction value of $340K and approximately 7,200 square feet (about $47/sqft), based on its TDLR filing.

📋Scope of Work

New metal building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.