Southwest GSE Remodel
Southwest GSE Remodel is a renovation/alteration project at 3500 Spirit of Texas Drive, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Nov 2019). The project has an estimated value of $450K across about 5,893 sq ft.
📊Project Metrics
TDLR #TABS2019016354Project Closed
Project has been completed and closed
Southwest GSE Remodel is a Renovation/Alteration project located at 3500 Spirit of Texas Drive, Austin, TX 78719 in Austin, Texas. The project has an estimated value of $450K covering 5,893 sq ft. Aviation Facilites Company, Inc (AFCO) is the property owner and MULTATECH Engineering, Inc. is the design firm of record. The project was registered with TDLR on July 17, 2019.
❓Frequently Asked Questions
What is Southwest GSE Remodel?
Southwest GSE Remodel is a renovation/alteration project at 3500 Spirit of Texas Drive in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: GSE SHOP: RELOCATE EXISTING SHOP EQUIPMENT INCLUDING AIR COMPRESSOR, OVERHEAD REELS, TWO VEHICLE LIFTS; MODIFY POWER; AND INSTALL WAREHOUSE FANS. OFFICE AREAS: REFINISH ROOMS INCLUDING NEW MILLWORK; MODIFY ROOM TO ADD SHOWER
Is Southwest GSE Remodel open in Austin?
Construction on Southwest GSE Remodel is complete — TDLR records show the project passed its required accessibility inspection in Nov 2019. The building is finished and very likely open.
Where is Southwest GSE Remodel located?
Southwest GSE Remodel is located at 3500 Spirit of Texas Drive, Austin, TX, 78719, in Travis County.
Who is the owner or developer of Southwest GSE Remodel?
Aviation Facilites Company, Inc (AFCO) is the property owner/developer of record for Southwest GSE Remodel, per its TDLR project registration.
Who is the architect or design firm for Southwest GSE Remodel?
MULTATECH Engineering, Inc. is the design firm of record for Southwest GSE Remodel, according to its TDLR filing.
How much does Southwest GSE Remodel cost and how big is it?
Southwest GSE Remodel has an estimated construction value of $450K and approximately 5,893 square feet (about $76/sqft), based on its TDLR filing.
📋Scope of Work
GSE SHOP: RELOCATE EXISTING SHOP EQUIPMENT INCLUDING AIR COMPRESSOR, OVERHEAD REELS, TWO VEHICLE LIFTS; MODIFY POWER; AND INSTALL WAREHOUSE FANS. OFFICE AREAS: REFINISH ROOMS INCLUDING NEW MILLWORK; MODIFY ROOM TO ADD SHOWER
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jul 17, 2019
Review Complete
Inspection Complete
Closed
Nov 15, 2019
📄Related City Permits
Building permits found at or near this location
(2nd Generation Space): Interior Tenant build-out of a new Killer Burger restaurant in an existing building. Work includes: New non-load bearing partition walls new interior finishes throughout space modifications to electrical service devices and low voltage system modifications to HVAC system modifications to existing plumbing. (2 Apps)
Inground pool and spa; no decking
requesting an Emergency permit. Suite has lost power. Will need to replace the faulty main service breaker enclosure
Installation of 540kW AC Roof Mounted Auxiliary Power System ***VOID per Hyatt Dunn** -AP 7/9/26
New 2-story 5 bedroom 5.5 bathroom single family residence with attached garage covered front porch and rear covered patio.