Construction complete · Mar 2020🏁Project Closed🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

Romco Manufacturing, Inc.

100 W. 1st Street, Deer Park, TX 77536, Deer Park, TX, 77536

Romco Manufacturing, Inc. is a additions to existing building project at 100 W. 1st Street, Deer Park, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2020). The project has an estimated value of $400K across about 6,700 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2019017612

$400K

Project Value

6,700

Square Feet

$60/sqft

Cost/SqFt

6 months

Duration

Registered:Aug 3, 2019

Start:Sep 30, 2019

Target:Mar 31, 2020

🏁

Project Closed

Project has been completed and closed

Romco Manufacturing, Inc. is a Additions to Existing Building project located at 100 W. 1st Street, Deer Park, TX 77536 in Deer Park, Texas. The project has an estimated value of $400K covering 6,700 sq ft. Romco Manufacturing is the property owner and Project Design Partners is the design firm of record. The project was registered with TDLR on August 3, 2019.

❓Frequently Asked Questions

What is Romco Manufacturing, Inc.?

Romco Manufacturing, Inc. is a additions to existing building project at 100 W. 1st Street in Deer Park, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: metal building shop and offices

Is Romco Manufacturing, Inc. open in Deer Park?

Construction on Romco Manufacturing, Inc. is complete — TDLR records show the project passed its required accessibility inspection in Mar 2020. The building is finished and very likely open.

Where is Romco Manufacturing, Inc. located?

Romco Manufacturing, Inc. is located at 100 W. 1st Street, Deer Park, TX, 77536, in Harris County.

Who is the owner or developer of Romco Manufacturing, Inc.?

Romco Manufacturing is the property owner/developer of record for Romco Manufacturing, Inc., per its TDLR project registration.

Who is the architect or design firm for Romco Manufacturing, Inc.?

Project Design Partners is the design firm of record for Romco Manufacturing, Inc., according to its TDLR filing.

How much does Romco Manufacturing, Inc. cost and how big is it?

Romco Manufacturing, Inc. has an estimated construction value of $400K and approximately 6,700 square feet (about $60/sqft), based on its TDLR filing.

📋Scope of Work

metal building shop and offices

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.