Construction complete · Jun 2020🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Southview Spec

2020 N. Lexington Blvd., Corpus Christi, TX 78409, Corpus Christi, TX, 78409

Southview Spec is a new construction project at 2020 N. Lexington Blvd., Corpus Christi, in Nueces County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jun 2020). The project has an estimated value of $400K across about 12,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020002385

$400K

Project Value

12,000

Square Feet

$33/sqft

Cost/SqFt

7 months

Duration

Registered:Oct 3, 2019

Start:Nov 1, 2019

Target:Jun 1, 2020

🏁

Project Closed

Project has been completed and closed

Southview Spec is a New Construction project located at 2020 N. Lexington Blvd., Corpus Christi, TX 78409 in Corpus Christi, Texas. The project has an estimated value of $400K covering 12,000 sq ft. Matthew Yankee is the property owner and Voss Engineering, Inc. is the design firm of record. The project was registered with TDLR on October 3, 2019.

❓Frequently Asked Questions

What is Southview Spec?

Southview Spec is a new construction project at 2020 N. Lexington Blvd. in Corpus Christi, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New metal building, foundation and finish out.

Is Southview Spec open in Corpus Christi?

Construction on Southview Spec is complete — TDLR records show the project passed its required accessibility inspection in Jun 2020. The building is finished and very likely open.

Where is Southview Spec located?

Southview Spec is located at 2020 N. Lexington Blvd., Corpus Christi, TX, 78409, in Nueces County.

Who is the owner or developer of Southview Spec?

Matthew Yankee is the property owner/developer of record for Southview Spec, per its TDLR project registration.

Who is the architect or design firm for Southview Spec?

Voss Engineering, Inc. is the design firm of record for Southview Spec, according to its TDLR filing.

How much does Southview Spec cost and how big is it?

Southview Spec has an estimated construction value of $400K and approximately 12,000 square feet (about $33/sqft), based on its TDLR filing.

📋Scope of Work

New metal building, foundation and finish out.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.