Construction complete · Jan 2020🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Midlothian, TX Fastenal Branch

501 Burk Hawkins Street, Midlothian, TX 76065, Midlothian, TX, 76065

Midlothian, TX Fastenal Branch is a new construction project at 501 Burk Hawkins Street, Midlothian, in Ellis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jan 2020). The project has an estimated value of $1.0M across about 6,881 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020002702

$1.0M

Project Value

6,881

Square Feet

$145/sqft

Cost/SqFt

3 months

Duration

Registered:Oct 8, 2019

Start:Oct 28, 2019

Target:Jan 15, 2020

🏁

Project Closed

Project has been completed and closed

Midlothian, TX Fastenal Branch is a New Construction project located at 501 Burk Hawkins Street, Midlothian, TX 76065 in Midlothian, Texas. The project has an estimated value of $1.0M covering 6,881 sq ft. Dana Johnson is the property owner. The project was registered with TDLR on October 8, 2019.

❓Frequently Asked Questions

What is Midlothian, TX Fastenal Branch?

Midlothian, TX Fastenal Branch is a new construction project at 501 Burk Hawkins Street in Midlothian, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Work will consist of new construction including both facility and site.

Is Midlothian, TX Fastenal Branch open in Midlothian?

Construction on Midlothian, TX Fastenal Branch is complete — TDLR records show the project passed its required accessibility inspection in Jan 2020. The building is finished and very likely open.

Where is Midlothian, TX Fastenal Branch located?

Midlothian, TX Fastenal Branch is located at 501 Burk Hawkins Street, Midlothian, TX, 76065, in Ellis County.

Who is the owner or developer of Midlothian, TX Fastenal Branch?

Dana Johnson is the property owner/developer of record for Midlothian, TX Fastenal Branch, per its TDLR project registration.

How much does Midlothian, TX Fastenal Branch cost and how big is it?

Midlothian, TX Fastenal Branch has an estimated construction value of $1.0M and approximately 6,881 square feet (about $145/sqft), based on its TDLR filing.

📋Scope of Work

Work will consist of new construction including both facility and site.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.