Construction complete · May 2020🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Sterling Ridge Section 3

101 Duck Haven Court, Huntsville, TX 77320, Huntsville, TX, 77320

Sterling Ridge Section 3 is a new construction project at 101 Duck Haven Court, Huntsville, in Walker County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2020). The project has an estimated value of $2.8M across about 27,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020003607

$2.8M

Project Value

27,000

Square Feet

$103/sqft

Cost/SqFt

6 months

Duration

Registered:Oct 21, 2019

Start:Nov 18, 2019

Target:May 1, 2020

🏁

Project Closed

Project has been completed and closed

Sterling Ridge Section 3 is a New Construction project located at 101 Duck Haven Court, Huntsville, TX 77320 in Huntsville, Texas. The project has an estimated value of $2.8M covering 27,000 sq ft. Ranier & Son Development Co, LLC is the property owner and Bleyl Engineering is the design firm of record. The project was registered with TDLR on October 21, 2019.

❓Frequently Asked Questions

What is Sterling Ridge Section 3?

Sterling Ridge Section 3 is a new construction project at 101 Duck Haven Court in Huntsville, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Public Infrastructure for a residential subdivision in Walker Co, Texas

Is Sterling Ridge Section 3 open in Huntsville?

Construction on Sterling Ridge Section 3 is complete — TDLR records show the project passed its required accessibility inspection in May 2020. The building is finished and very likely open.

Where is Sterling Ridge Section 3 located?

Sterling Ridge Section 3 is located at 101 Duck Haven Court, Huntsville, TX, 77320, in Walker County.

Who is the owner or developer of Sterling Ridge Section 3?

Ranier & Son Development Co, LLC is the property owner/developer of record for Sterling Ridge Section 3, per its TDLR project registration.

Who is the architect or design firm for Sterling Ridge Section 3?

Bleyl Engineering is the design firm of record for Sterling Ridge Section 3, according to its TDLR filing.

How much does Sterling Ridge Section 3 cost and how big is it?

Sterling Ridge Section 3 has an estimated construction value of $2.8M and approximately 27,000 square feet (about $103/sqft), based on its TDLR filing.

📋Scope of Work

Public Infrastructure for a residential subdivision in Walker Co, Texas

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.