Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

diesel barbershop

6720 Alma Rd, suite 300, Mckinney, TX 75070, Mckinney, TX, 75070

diesel barbershop is a renovation/alteration project at 6720 Alma Rd, suite 300, Mckinney, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $250K across about 1,440 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2020004281

$250K

Project Value

1,440

Square Feet

$174/sqft

Cost/SqFt

2 months

Duration

Registered:Oct 30, 2019

Start:Nov 18, 2019

Target:Jan 20, 2020

📝

Review Complete

Design review complete, construction may proceed

diesel barbershop is a Renovation/Alteration project located at 6720 Alma Rd, suite 300, Mckinney, TX 75070 in Mckinney, Texas. The project has an estimated value of $250K covering 1,440 sq ft. McKinney HUB 121 LLC is the property owner and Cortland Morgan Architects is the design firm of record. The project was registered with TDLR on October 30, 2019.

❓Frequently Asked Questions

What is diesel barbershop?

diesel barbershop is a renovation/alteration project at 6720 Alma Rd, suite 300 in Mckinney, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Build out of new non-bearing partitions. New electric service,lighting, new HVAC & ductwork. Finishes

Is diesel barbershop open in Mckinney?

diesel barbershop is currently under construction in Mckinney, TX. Its current TDLR status is "Review Complete".

Where is diesel barbershop located?

diesel barbershop is located at 6720 Alma Rd, suite 300, Mckinney, TX, 75070, in Collin County.

Who is the owner or developer of diesel barbershop?

McKinney HUB 121 LLC is the property owner/developer of record for diesel barbershop, per its TDLR project registration.

Who is the architect or design firm for diesel barbershop?

Cortland Morgan Architects is the design firm of record for diesel barbershop, according to its TDLR filing.

How much does diesel barbershop cost and how big is it?

diesel barbershop has an estimated construction value of $250K and approximately 1,440 square feet (about $174/sqft), based on its TDLR filing.

📋Scope of Work

Build out of new non-bearing partitions. New electric service,lighting, new HVAC & ductwork. Finishes

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.