Construction complete · May 2020🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Dollar General - Cut & Shoot

12266 HWY. 105 E., Cut And Shoot, TX 77306, Cut And Shoot, TX, 77306

Dollar General - Cut & Shoot is a new construction project at 12266 HWY. 105 E., Cut And Shoot, in Montgomery County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2020). The project has an estimated value of $400K across about 9,100 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020004812

$400K

Project Value

9,100

Square Feet

$44/sqft

Cost/SqFt

3 months

Duration

Registered:Nov 7, 2019

Start:Feb 1, 2020

Target:May 15, 2020

🏁

Project Closed

Project has been completed and closed

Dollar General - Cut & Shoot is a New Construction project located at 12266 HWY. 105 E., Cut And Shoot, TX 77306 in Cut And Shoot, Texas. The project has an estimated value of $400K covering 9,100 sq ft. Cut and Shoot DTP, LLC is the property owner and MJM Architects is the design firm of record. The project was registered with TDLR on November 7, 2019.

❓Frequently Asked Questions

What is Dollar General - Cut & Shoot?

Dollar General - Cut & Shoot is a new construction project at 12266 HWY. 105 E. in Cut And Shoot, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construct new pre-engineered metal building with partial CMU front facade and complete tenant infill / finishes package.

Is Dollar General - Cut & Shoot open in Cut And Shoot?

Construction on Dollar General - Cut & Shoot is complete — TDLR records show the project passed its required accessibility inspection in May 2020. The building is finished and very likely open.

Where is Dollar General - Cut & Shoot located?

Dollar General - Cut & Shoot is located at 12266 HWY. 105 E., Cut And Shoot, TX, 77306, in Montgomery County.

Who is the owner or developer of Dollar General - Cut & Shoot?

Cut and Shoot DTP, LLC is the property owner/developer of record for Dollar General - Cut & Shoot, per its TDLR project registration.

Who is the architect or design firm for Dollar General - Cut & Shoot?

MJM Architects is the design firm of record for Dollar General - Cut & Shoot, according to its TDLR filing.

How much does Dollar General - Cut & Shoot cost and how big is it?

Dollar General - Cut & Shoot has an estimated construction value of $400K and approximately 9,100 square feet (about $44/sqft), based on its TDLR filing.

📋Scope of Work

Construct new pre-engineered metal building with partial CMU front facade and complete tenant infill / finishes package.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.