Construction complete · Dec 2020🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Bill Miller

3010 US 181 Nueces, Portland, TX 78374, Portland, TX, 78374

Bill Miller is a new construction project at 3010 US 181 Nueces, Portland, in Nueces County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2020). The project has an estimated value of $537K across about 4,218 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020008305

$537K

Project Value

4,218

Square Feet

$127/sqft

Cost/SqFt

11 months

Duration

Registered:Dec 31, 2019

Start:Feb 1, 2020

Target:Dec 31, 2020

🏁

Project Closed

Project has been completed and closed

Bill Miller is a New Construction project located at 3010 US 181 Nueces, Portland, TX 78374 in Portland, Texas. The project has an estimated value of $537K covering 4,218 sq ft. Bill Miller Bar-B-Q is the property owner and Stephen J Kramer Architecture + Design is the design firm of record. The project was registered with TDLR on December 31, 2019.

❓Frequently Asked Questions

What is Bill Miller?

Bill Miller is a new construction project at 3010 US 181 Nueces in Portland, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New Bill Miller Restaurant

Is Bill Miller open in Portland?

Construction on Bill Miller is complete — TDLR records show the project passed its required accessibility inspection in Dec 2020. The building is finished and very likely open.

Where is Bill Miller located?

Bill Miller is located at 3010 US 181 Nueces, Portland, TX, 78374, in Nueces County.

Who is the owner or developer of Bill Miller?

Bill Miller Bar-B-Q is the property owner/developer of record for Bill Miller, per its TDLR project registration.

Who is the architect or design firm for Bill Miller?

Stephen J Kramer Architecture + Design is the design firm of record for Bill Miller, according to its TDLR filing.

How much does Bill Miller cost and how big is it?

Bill Miller has an estimated construction value of $537K and approximately 4,218 square feet (about $127/sqft), based on its TDLR filing.

📋Scope of Work

New Bill Miller Restaurant

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.