Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Gulf Coast Alloy Welding

4403 Theiss Road, Humble, TX 77338, Humble, TX, 77338

Gulf Coast Alloy Welding is a new construction project at 4403 Theiss Road, Humble, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $100K across about 5,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2020018243

$100K

Project Value

5,000

Square Feet

$20/sqft

Cost/SqFt

4 months

Duration

Registered:Jun 1, 2020

Start:Jul 1, 2020

Target:Nov 1, 2020

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Gulf Coast Alloy Welding is a New Construction project located at 4403 Theiss Road, Humble, TX 77338 in Humble, Texas. The project has an estimated value of $100K covering 5,000 sq ft. Ryan DesChamps is the property owner and Segma Group, LLC is the design firm of record. The project was registered with TDLR on June 1, 2020.

❓Frequently Asked Questions

What is Gulf Coast Alloy Welding?

Gulf Coast Alloy Welding is a new construction project at 4403 Theiss Road in Humble, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Steel Piping Storage Building

Is Gulf Coast Alloy Welding open in Humble?

Gulf Coast Alloy Welding is currently under construction in Humble, TX. Its current TDLR status is "Project Registered".

Where is Gulf Coast Alloy Welding located?

Gulf Coast Alloy Welding is located at 4403 Theiss Road, Humble, TX, 77338, in Harris County.

Who is the owner or developer of Gulf Coast Alloy Welding?

Ryan DesChamps is the property owner/developer of record for Gulf Coast Alloy Welding, per its TDLR project registration.

Who is the architect or design firm for Gulf Coast Alloy Welding?

Segma Group, LLC is the design firm of record for Gulf Coast Alloy Welding, according to its TDLR filing.

How much does Gulf Coast Alloy Welding cost and how big is it?

Gulf Coast Alloy Welding has an estimated construction value of $100K and approximately 5,000 square feet (about $20/sqft), based on its TDLR filing.

📋Scope of Work

Steel Piping Storage Building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.