An Addition to Summit Plastic Molding
An Addition to Summit Plastic Molding is a additions to existing building project at 201 Darrington Road, Horizon City, in El Paso County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2021). The project has an estimated value of $1.4M across about 22,270 sq ft.
📊Project Metrics
TDLR #TABS2020019988Project Closed
Project has been completed and closed
An Addition to Summit Plastic Molding is a Additions to Existing Building project located at 201 Darrington Road, Horizon City, TX 79928 in Horizon City, Texas. The project has an estimated value of $1.4M covering 22,270 sq ft. Summit Plastic Molding II, Inc. is the property owner and PSRBB Commercial Group Inc. is the design firm of record. The project was registered with TDLR on July 2, 2020.
❓Frequently Asked Questions
What is An Addition to Summit Plastic Molding?
An Addition to Summit Plastic Molding is a additions to existing building project at 201 Darrington Road in Horizon City, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: A 22,270 sf addition to an existing 70,310 sf pre-engineered metal building for a plastic molding facility.
Is An Addition to Summit Plastic Molding open in Horizon City?
Construction on An Addition to Summit Plastic Molding is complete — TDLR records show the project passed its required accessibility inspection in Mar 2021. The building is finished and very likely open.
Where is An Addition to Summit Plastic Molding located?
An Addition to Summit Plastic Molding is located at 201 Darrington Road, Horizon City, TX, 79928, in El Paso County.
Who is the owner or developer of An Addition to Summit Plastic Molding?
Summit Plastic Molding II, Inc. is the property owner/developer of record for An Addition to Summit Plastic Molding, per its TDLR project registration.
Who is the architect or design firm for An Addition to Summit Plastic Molding?
PSRBB Commercial Group Inc. is the design firm of record for An Addition to Summit Plastic Molding, according to its TDLR filing.
How much does An Addition to Summit Plastic Molding cost and how big is it?
An Addition to Summit Plastic Molding has an estimated construction value of $1.4M and approximately 22,270 square feet (about $63/sqft), based on its TDLR filing.
📋Scope of Work
A 22,270 sf addition to an existing 70,310 sf pre-engineered metal building for a plastic molding facility.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jul 2, 2020
Review Complete
Inspection Complete
Closed
Mar 3, 2021