The Horse's Axe
The Horse's Axe is a renovation/alteration project at 400 S. Elm St, Denton, in Denton County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2020). The project has an estimated value of $60K across about 2,500 sq ft.
📊Project Metrics
TDLR #TABS2020021070Project Closed
Project has been completed and closed
The Horse's Axe is a Renovation/Alteration project located at 400 S. Elm St, Denton, TX 76201 in Denton, Texas. The project has an estimated value of $60K covering 2,500 sq ft. L&S Properties is the property owner and Richard E. Cooper Engineering, Inc is the design firm of record. The project was registered with TDLR on July 24, 2020.
❓Frequently Asked Questions
What is The Horse's Axe?
The Horse's Axe is a renovation/alteration project at 400 S. Elm St in Denton, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Update plumbing and electrical. Add three 5-ton HVAC units. Furr out walls and add insulation. Add Axe Throwing cages and refrigeration units.
Is The Horse's Axe open in Denton?
Construction on The Horse's Axe is complete — TDLR records show the project passed its required accessibility inspection in Oct 2020. The building is finished and very likely open.
Where is The Horse's Axe located?
The Horse's Axe is located at 400 S. Elm St, Denton, TX, 76201, in Denton County.
Who is the owner or developer of The Horse's Axe?
L&S Properties is the property owner/developer of record for The Horse's Axe, per its TDLR project registration.
Who is the architect or design firm for The Horse's Axe?
Richard E. Cooper Engineering, Inc is the design firm of record for The Horse's Axe, according to its TDLR filing.
How much does The Horse's Axe cost and how big is it?
The Horse's Axe has an estimated construction value of $60K and approximately 2,500 square feet (about $24/sqft), based on its TDLR filing.
📋Scope of Work
Update plumbing and electrical. Add three 5-ton HVAC units. Furr out walls and add insulation. Add Axe Throwing cages and refrigeration units.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jul 24, 2020
Review Complete
Inspection Complete
Closed
Oct 1, 2020