Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

STANLEY PARTS STORAGE BUILDING #A

16127 MARKET ST #A`, Baytown, TX 77530, Baytown, TX, 77530

STANLEY PARTS STORAGE BUILDING #A is a new construction project at 16127 MARKET ST #A`, Baytown, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $150K across about 4,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2020022295

$150K

Project Value

4,000

Square Feet

$38/sqft

Cost/SqFt

10 months

Duration

Registered:Aug 17, 2020

Start:Oct 15, 2020

Target:Aug 15, 2021

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

STANLEY PARTS STORAGE BUILDING #A is a New Construction project located at 16127 MARKET ST #A`, Baytown, TX 77530 in Baytown, Texas. The project has an estimated value of $150K covering 4,000 sq ft. STANLEY PARTS AND EQUIPMENT is the property owner. The project was registered with TDLR on August 17, 2020.

❓Frequently Asked Questions

What is STANLEY PARTS STORAGE BUILDING #A?

STANLEY PARTS STORAGE BUILDING #A is a new construction project at 16127 MARKET ST #A` in Baytown, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: PROPOSED STORAGE BUILDING

Is STANLEY PARTS STORAGE BUILDING #A open in Baytown?

STANLEY PARTS STORAGE BUILDING #A is currently under construction in Baytown, TX. Its current TDLR status is "Project Registered".

Where is STANLEY PARTS STORAGE BUILDING #A located?

STANLEY PARTS STORAGE BUILDING #A is located at 16127 MARKET ST #A`, Baytown, TX, 77530, in Harris County.

Who is the owner or developer of STANLEY PARTS STORAGE BUILDING #A?

STANLEY PARTS AND EQUIPMENT is the property owner/developer of record for STANLEY PARTS STORAGE BUILDING #A, per its TDLR project registration.

How much does STANLEY PARTS STORAGE BUILDING #A cost and how big is it?

STANLEY PARTS STORAGE BUILDING #A has an estimated construction value of $150K and approximately 4,000 square feet (about $38/sqft), based on its TDLR filing.

📋Scope of Work

PROPOSED STORAGE BUILDING

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.