Construction complete · Jun 2021✅Inspection Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

GAPCO 3.0

520 Lockwood Drive, Richardson, TX 75080, Richardson, TX, 75080

GAPCO 3.0 is a renovation/alteration project at 520 Lockwood Drive, Richardson, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jun 2021). The project has an estimated value of $400K across about 4,875 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2020022688

$400K

Project Value

4,875

Square Feet

$82/sqft

Cost/SqFt

9 months

Duration

Registered:Aug 24, 2020

Start:Oct 1, 2020

Target:Jun 15, 2021

✅

Inspection Complete

Final inspection completed, awaiting project closure

GAPCO 3.0 is a Renovation/Alteration project located at 520 Lockwood Drive, Richardson, TX 75080 in Richardson, Texas. The project has an estimated value of $400K covering 4,875 sq ft. David Harrel is the property owner and Plan B Group is the design firm of record. The project was registered with TDLR on August 24, 2020.

❓Frequently Asked Questions

What is GAPCO 3.0?

GAPCO 3.0 is a renovation/alteration project at 520 Lockwood Drive in Richardson, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Tenant Finish-out

Is GAPCO 3.0 open in Richardson?

Construction on GAPCO 3.0 is complete — TDLR records show the project passed its required accessibility inspection in Jun 2021. The building is finished and very likely open.

Where is GAPCO 3.0 located?

GAPCO 3.0 is located at 520 Lockwood Drive, Richardson, TX, 75080, in Dallas County.

Who is the owner or developer of GAPCO 3.0?

David Harrel is the property owner/developer of record for GAPCO 3.0, per its TDLR project registration.

Who is the architect or design firm for GAPCO 3.0?

Plan B Group is the design firm of record for GAPCO 3.0, according to its TDLR filing.

How much does GAPCO 3.0 cost and how big is it?

GAPCO 3.0 has an estimated construction value of $400K and approximately 4,875 square feet (about $82/sqft), based on its TDLR filing.

📋Scope of Work

Tenant Finish-out

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.