Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Bayport Polymers Phase 1B

12212 Port Road, Pasadena, TX 77507, Pasadena, TX, 77507

Bayport Polymers Phase 1B is a renovation/alteration project at 12212 Port Road, Pasadena, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $650K across about 4,490 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2020022706

$650K

Project Value

4,490

Square Feet

$145/sqft

Cost/SqFt

8 months

Duration

Registered:Aug 24, 2020

Start:Oct 5, 2020

Target:Jun 1, 2021

📝

Review Complete

Design review complete, construction may proceed

Bayport Polymers Phase 1B is a Renovation/Alteration project located at 12212 Port Road, Pasadena, TX 77507 in Pasadena, Texas. The project has an estimated value of $650K covering 4,490 sq ft. Bayport Polymers is the property owner and Ryden Architecture, LLC is the design firm of record. The project was registered with TDLR on August 24, 2020.

❓Frequently Asked Questions

What is Bayport Polymers Phase 1B?

Bayport Polymers Phase 1B is a renovation/alteration project at 12212 Port Road in Pasadena, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior renovation of restrooms and break areas.

Is Bayport Polymers Phase 1B open in Pasadena?

Bayport Polymers Phase 1B is currently under construction in Pasadena, TX. Its current TDLR status is "Review Complete".

Where is Bayport Polymers Phase 1B located?

Bayport Polymers Phase 1B is located at 12212 Port Road, Pasadena, TX, 77507, in Harris County.

Who is the owner or developer of Bayport Polymers Phase 1B?

Bayport Polymers is the property owner/developer of record for Bayport Polymers Phase 1B, per its TDLR project registration.

Who is the architect or design firm for Bayport Polymers Phase 1B?

Ryden Architecture, LLC is the design firm of record for Bayport Polymers Phase 1B, according to its TDLR filing.

How much does Bayport Polymers Phase 1B cost and how big is it?

Bayport Polymers Phase 1B has an estimated construction value of $650K and approximately 4,490 square feet (about $145/sqft), based on its TDLR filing.

📋Scope of Work

Interior renovation of restrooms and break areas.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.