Construction complete · Sep 2020🏁Project Closed🏗️ New Construction💵 This project involves public funds, public land, or is a Federally funded roadway project.

TAMU RELLIS Hangers, Building 3&4

3100 TX 47, Bryan, TX 77807, Bryan, TX, 77807

TAMU RELLIS Hangers, Building 3&4 is a new construction project at 3100 TX 47, Bryan, in Brazos County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Sep 2020). The project has an estimated value of $697K across about 6,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020023057

$697K

Project Value

6,000

Square Feet

$116/sqft

Cost/SqFt

7 months

Duration

Registered:Aug 31, 2020

Start:Feb 28, 2020

Target:Sep 30, 2020

🏁

Project Closed

Project has been completed and closed

TAMU RELLIS Hangers, Building 3&4 is a New Construction project located at 3100 TX 47, Bryan, TX 77807 in Bryan, Texas. The project has an estimated value of $697K covering 6,000 sq ft. Texas A&M University is the property owner and QuadTEX Construction is the design firm of record. The project was registered with TDLR on August 31, 2020.

❓Frequently Asked Questions

What is TAMU RELLIS Hangers, Building 3&4?

TAMU RELLIS Hangers, Building 3&4 is a new construction project at 3100 TX 47 in Bryan, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Two new airplane hangers, shell buildings with no finish-out inside.

Is TAMU RELLIS Hangers, Building 3&4 open in Bryan?

Construction on TAMU RELLIS Hangers, Building 3&4 is complete — TDLR records show the project passed its required accessibility inspection in Sep 2020. The building is finished and very likely open.

Where is TAMU RELLIS Hangers, Building 3&4 located?

TAMU RELLIS Hangers, Building 3&4 is located at 3100 TX 47, Bryan, TX, 77807, in Brazos County.

Who is the owner or developer of TAMU RELLIS Hangers, Building 3&4?

Texas A&M University is the property owner/developer of record for TAMU RELLIS Hangers, Building 3&4, per its TDLR project registration.

Who is the architect or design firm for TAMU RELLIS Hangers, Building 3&4?

QuadTEX Construction is the design firm of record for TAMU RELLIS Hangers, Building 3&4, according to its TDLR filing.

How much does TAMU RELLIS Hangers, Building 3&4 cost and how big is it?

TAMU RELLIS Hangers, Building 3&4 has an estimated construction value of $697K and approximately 6,000 square feet (about $116/sqft), based on its TDLR filing.

📋Scope of Work

Two new airplane hangers, shell buildings with no finish-out inside.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.