Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

New Building for Weighing Technologies

4250 Milam St, Beaumont, TX 77707, Beaumont, TX, 77707

New Building for Weighing Technologies is a new construction project at 4250 Milam St, Beaumont, in Jefferson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $900K across about 7,120 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2021002285

$900K

Project Value

7,120

Square Feet

$126/sqft

Cost/SqFt

1y 11mo

Duration

Registered:Oct 9, 2020

Start:Jan 1, 2021

Target:Nov 15, 2022

📝

Review Complete

Design review complete, construction may proceed

New Building for Weighing Technologies is a New Construction project located at 4250 Milam St, Beaumont, TX 77707 in Beaumont, Texas. The project has an estimated value of $900K covering 7,120 sq ft. John Rihn is the property owner and Tim Broadhead Architects is the design firm of record. The project was registered with TDLR on October 9, 2020.

❓Frequently Asked Questions

What is New Building for Weighing Technologies?

New Building for Weighing Technologies is a new construction project at 4250 Milam St in Beaumont, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New Building, offices and shop areas. New development with parking areas.

Is New Building for Weighing Technologies open in Beaumont?

New Building for Weighing Technologies is currently under construction in Beaumont, TX. Its current TDLR status is "Review Complete".

Where is New Building for Weighing Technologies located?

New Building for Weighing Technologies is located at 4250 Milam St, Beaumont, TX, 77707, in Jefferson County.

Who is the owner or developer of New Building for Weighing Technologies?

John Rihn is the property owner/developer of record for New Building for Weighing Technologies, per its TDLR project registration.

Who is the architect or design firm for New Building for Weighing Technologies?

Tim Broadhead Architects is the design firm of record for New Building for Weighing Technologies, according to its TDLR filing.

How much does New Building for Weighing Technologies cost and how big is it?

New Building for Weighing Technologies has an estimated construction value of $900K and approximately 7,120 square feet (about $126/sqft), based on its TDLR filing.

📋Scope of Work

New Building, offices and shop areas. New development with parking areas.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.