Construction complete · Aug 2021🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Lube n Go

12250 Pellicano Dr, El Paso, TX 79936, El Paso, TX, 79936

Lube n Go is a new construction project at 12250 Pellicano Dr, El Paso, in El Paso County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Aug 2021). The project has an estimated value of $750K across about 6,333 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2021004725

$750K

Project Value

6,333

Square Feet

$118/sqft

Cost/SqFt

8 months

Duration

Registered:Nov 19, 2020

Start:Jan 4, 2021

Target:Aug 31, 2021

🏁

Project Closed

Project has been completed and closed

Lube n Go is a New Construction project located at 12250 Pellicano Dr, El Paso, TX 79936 in El Paso, Texas. The project has an estimated value of $750K covering 6,333 sq ft. Lube N Go is the property owner and Loya Wilke Architects, LLP is the design firm of record. The project was registered with TDLR on November 19, 2020.

❓Frequently Asked Questions

What is Lube n Go?

Lube n Go is a new construction project at 12250 Pellicano Dr in El Paso, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: The project consists of the construction of a two story Autocare building of approximately 3,708 square feet located on the ground and basement floors of the Lube 'n Go autocare building with adjacent retail shell space of approximately…

Is Lube n Go open in El Paso?

Construction on Lube n Go is complete — TDLR records show the project passed its required accessibility inspection in Aug 2021. The building is finished and very likely open.

Where is Lube n Go located?

Lube n Go is located at 12250 Pellicano Dr, El Paso, TX, 79936, in El Paso County.

Who is the owner or developer of Lube n Go?

Lube N Go is the property owner/developer of record for Lube n Go, per its TDLR project registration.

Who is the architect or design firm for Lube n Go?

Loya Wilke Architects, LLP is the design firm of record for Lube n Go, according to its TDLR filing.

How much does Lube n Go cost and how big is it?

Lube n Go has an estimated construction value of $750K and approximately 6,333 square feet (about $118/sqft), based on its TDLR filing.

📋Scope of Work

The project consists of the construction of a two story Autocare building of approximately 3,708 square feet located on the ground and basement floors of the Lube 'n Go autocare building with adjacent retail shell space of approximately 2,625 square

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.