Construction complete · Feb 2022🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

FirstBank Southwest Branch Bank

300 W. Kingsmill, Pampa, TX 79065, Pampa, TX, 79065

FirstBank Southwest Branch Bank is a new construction project at 300 W. Kingsmill, Pampa, in Gray County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2022). The project has an estimated value of $3.0M across about 8,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2021011212

$3.0M

Project Value

8,000

Square Feet

$375/sqft

Cost/SqFt

10 months

Duration

Registered:Mar 15, 2021

Start:May 1, 2021

Target:Feb 15, 2022

🏁

Project Closed

Project has been completed and closed

FirstBank Southwest Branch Bank is a New Construction project located at 300 W. Kingsmill, Pampa, TX 79065 in Pampa, Texas. The project has an estimated value of $3.0M covering 8,000 sq ft. FirstBank Southwest is the property owner and SPM Architects is the design firm of record. The project was registered with TDLR on March 15, 2021.

❓Frequently Asked Questions

What is FirstBank Southwest Branch Bank?

FirstBank Southwest Branch Bank is a new construction project at 300 W. Kingsmill in Pampa, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New Branch Bank

Is FirstBank Southwest Branch Bank open in Pampa?

Construction on FirstBank Southwest Branch Bank is complete — TDLR records show the project passed its required accessibility inspection in Feb 2022. The building is finished and very likely open.

Where is FirstBank Southwest Branch Bank located?

FirstBank Southwest Branch Bank is located at 300 W. Kingsmill, Pampa, TX, 79065, in Gray County.

Who is the owner or developer of FirstBank Southwest Branch Bank?

FirstBank Southwest is the property owner/developer of record for FirstBank Southwest Branch Bank, per its TDLR project registration.

Who is the architect or design firm for FirstBank Southwest Branch Bank?

SPM Architects is the design firm of record for FirstBank Southwest Branch Bank, according to its TDLR filing.

How much does FirstBank Southwest Branch Bank cost and how big is it?

FirstBank Southwest Branch Bank has an estimated construction value of $3.0M and approximately 8,000 square feet (about $375/sqft), based on its TDLR filing.

📋Scope of Work

New Branch Bank

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.