Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Microsoft MTC

7000 N. State Hwy 161, Irving, TX 75039, Irving, TX, 75039

Microsoft MTC is a renovation/alteration project at 7000 N. State Hwy 161, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $250K across about 2,200 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2021012418

$250K

Project Value

2,200

Square Feet

$114/sqft

Cost/SqFt

7 months

Duration

Registered:Mar 31, 2021

Start:May 1, 2021

Target:Nov 30, 2021

📝

Review Complete

Design review complete, construction may proceed

Microsoft MTC is a Renovation/Alteration project located at 7000 N. State Hwy 161, Irving, TX 75039 in Irving, Texas. The project has an estimated value of $250K covering 2,200 sq ft. Shelbie Gibbons is the property owner and Perkins and Will is the design firm of record. The project was registered with TDLR on March 31, 2021.

❓Frequently Asked Questions

What is Microsoft MTC?

Microsoft MTC is a renovation/alteration project at 7000 N. State Hwy 161 in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior Finish out

Is Microsoft MTC open in Irving?

Microsoft MTC is currently under construction in Irving, TX. Its current TDLR status is "Review Complete".

Where is Microsoft MTC located?

Microsoft MTC is located at 7000 N. State Hwy 161, Irving, TX, 75039, in Dallas County.

Who is the owner or developer of Microsoft MTC?

Shelbie Gibbons is the property owner/developer of record for Microsoft MTC, per its TDLR project registration.

Who is the architect or design firm for Microsoft MTC?

Perkins and Will is the design firm of record for Microsoft MTC, according to its TDLR filing.

How much does Microsoft MTC cost and how big is it?

Microsoft MTC has an estimated construction value of $250K and approximately 2,200 square feet (about $114/sqft), based on its TDLR filing.

📋Scope of Work

Interior Finish out

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.