UTSA SEB RENO FOR 3D METAL PRINTER
UTSA SEB RENO FOR 3D METAL PRINTER is a renovation/alteration project at One UTSA Circle, San Antonio, in Bexar County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Aug 2021). The project has an estimated value of $245K across about 668 sq ft.
📊Project Metrics
TDLR #TABS2021013148Project Closed
Project has been completed and closed
UTSA SEB RENO FOR 3D METAL PRINTER is a Renovation/Alteration project located at One UTSA Circle, San Antonio, TX 78249 in San Antonio, Texas. The project has an estimated value of $245K covering 668 sq ft. UTSA is the property owner. The project was registered with TDLR on April 12, 2021.
❓Frequently Asked Questions
What is UTSA SEB RENO FOR 3D METAL PRINTER?
UTSA SEB RENO FOR 3D METAL PRINTER is a renovation/alteration project at One UTSA Circle in San Antonio, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Renovate existing lab with new vestibule and 2 hour fire rated room assembly (new infrastructure, ceiling, doors, electrostatic dissipative flooring) to accommodate new UTSA procured lab equipment.
Is UTSA SEB RENO FOR 3D METAL PRINTER open in San Antonio?
Construction on UTSA SEB RENO FOR 3D METAL PRINTER is complete — TDLR records show the project passed its required accessibility inspection in Aug 2021. The building is finished and very likely open.
Where is UTSA SEB RENO FOR 3D METAL PRINTER located?
UTSA SEB RENO FOR 3D METAL PRINTER is located at One UTSA Circle, San Antonio, TX, 78249, in Bexar County.
Who is the owner or developer of UTSA SEB RENO FOR 3D METAL PRINTER?
UTSA is the property owner/developer of record for UTSA SEB RENO FOR 3D METAL PRINTER, per its TDLR project registration.
How much does UTSA SEB RENO FOR 3D METAL PRINTER cost and how big is it?
UTSA SEB RENO FOR 3D METAL PRINTER has an estimated construction value of $245K and approximately 668 square feet (about $367/sqft), based on its TDLR filing.
📋Scope of Work
Renovate existing lab with new vestibule and 2 hour fire rated room assembly (new infrastructure, ceiling, doors, electrostatic dissipative flooring) to accommodate new UTSA procured lab equipment.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Apr 12, 2021
Review Complete
Inspection Complete
Closed
Aug 15, 2021