Bastrop Echo Base
Bastrop Echo Base is a renovation/alteration project at 402 Technology Dr., Bastrop, in Bastrop County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Nov 2021). The project has an estimated value of $250K across about 14,292 sq ft.
📊Project Metrics
TDLR #TABS2021015187Project Closed
Project has been completed and closed
Bastrop Echo Base is a Renovation/Alteration project located at 402 Technology Dr., Bastrop, TX 78602 in Bastrop, Texas. The project has an estimated value of $250K covering 14,292 sq ft. Pyrology Foundry & Studio is the property owner and Dick Clark and Associates is the design firm of record. The project was registered with TDLR on May 7, 2021.
❓Frequently Asked Questions
What is Bastrop Echo Base?
Bastrop Echo Base is a renovation/alteration project at 402 Technology Dr. in Bastrop, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: THIS IS A REMODEL OF AN EXISTING 14,292 SF INDUSTRIAL WAREHOUSE FOR THE USE S OF MAKING METAL SCULPTURES AND ITS ADMINISTRATION OFFICE SPACES INSIDE A NON SPRINKLED PRE-ENGINEERED METAL BUILDING. THE BOTH USES WILL BE DIVIDED BY A 2HR FI…
Is Bastrop Echo Base open in Bastrop?
Construction on Bastrop Echo Base is complete — TDLR records show the project passed its required accessibility inspection in Nov 2021. The building is finished and very likely open.
Where is Bastrop Echo Base located?
Bastrop Echo Base is located at 402 Technology Dr., Bastrop, TX, 78602, in Bastrop County.
Who is the owner or developer of Bastrop Echo Base?
Pyrology Foundry & Studio is the property owner/developer of record for Bastrop Echo Base, per its TDLR project registration.
Who is the architect or design firm for Bastrop Echo Base?
Dick Clark and Associates is the design firm of record for Bastrop Echo Base, according to its TDLR filing.
How much does Bastrop Echo Base cost and how big is it?
Bastrop Echo Base has an estimated construction value of $250K and approximately 14,292 square feet (about $17/sqft), based on its TDLR filing.
📋Scope of Work
THIS IS A REMODEL OF AN EXISTING 14,292 SF INDUSTRIAL WAREHOUSE FOR THE USE S OF MAKING METAL SCULPTURES AND ITS ADMINISTRATION OFFICE SPACES INSIDE A NON SPRINKLED PRE-ENGINEERED METAL BUILDING. THE BOTH USES WILL BE DIVIDED BY A 2HR FIRE RATED WALL
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
May 7, 2021
Review Complete
Inspection Complete
Closed
Nov 1, 2021
🔗Related Projects
📄Related City Permits
Building permits found at or near this location
Aluminum pergola 33x 13 enclosed with motorized screen. See attached scope of work and 3D design.
Replacement of complete existing central heat and air system with or without duct work LIKE FOR LIKE: 2.5 Gas Horizontal System (Upstairs) LIKE FOR LIKE: 3 Ton Gas Horizontal System (Downstairs) **TWO SYSTEM CHANGE OUT**
Replacement of complete existing central heat and air system with or without duct work HVAC changeout: replace existing 3-ton split system (air conditioner condenser and gas furnace) with new like-for-like equipment; no duct or electrical alterations noted. No structural change.
Replacement of complete existing central heat and air system with or without duct work
Replacement of an existing water heater 40-gallon water heater change out 4029 Dominion Cove Austin TX 78759