Construction complete · Aug 2021✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Bissell TI

2935 Danieldale Road, Lancaster, TX 75134, Lancaster, TX, 75134

Bissell TI is a new construction project at 2935 Danieldale Road, Lancaster, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Aug 2021). The project has an estimated value of $2.0M across about 4,429 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2021015625

$2.0M

Project Value

4,429

Square Feet

$452/sqft

Cost/SqFt

2 months

Duration

Registered:May 13, 2021

Start:Jun 1, 2021

Target:Aug 2, 2021

✅

Inspection Complete

Final inspection completed, awaiting project closure

Bissell TI is a New Construction project located at 2935 Danieldale Road, Lancaster, TX 75134 in Lancaster, Texas. The project has an estimated value of $2.0M covering 4,429 sq ft. Southpointe owner LLC is the property owner and RGA Architects, Inc. is the design firm of record. The project was registered with TDLR on May 13, 2021.

❓Frequently Asked Questions

What is Bissell TI?

Bissell TI is a new construction project at 2935 Danieldale Road in Lancaster, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New office finish out in an existing industrial building

Is Bissell TI open in Lancaster?

Construction on Bissell TI is complete — TDLR records show the project passed its required accessibility inspection in Aug 2021. The building is finished and very likely open.

Where is Bissell TI located?

Bissell TI is located at 2935 Danieldale Road, Lancaster, TX, 75134, in Dallas County.

Who is the owner or developer of Bissell TI?

Southpointe owner LLC is the property owner/developer of record for Bissell TI, per its TDLR project registration.

Who is the architect or design firm for Bissell TI?

RGA Architects, Inc. is the design firm of record for Bissell TI, according to its TDLR filing.

How much does Bissell TI cost and how big is it?

Bissell TI has an estimated construction value of $2.0M and approximately 4,429 square feet (about $452/sqft), based on its TDLR filing.

📋Scope of Work

New office finish out in an existing industrial building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.