Acutronic Test Cell and Office
Acutronic Test Cell and Office is a renovation/alteration project at 1100 E Howard Lane, Suite 100, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2021). The project has an estimated value of $100K across about 1,000 sq ft.
📊Project Metrics
TDLR #TABS2021021824Project Closed
Project has been completed and closed
Acutronic Test Cell and Office is a Renovation/Alteration project located at 1100 E Howard Lane, Suite 100, Austin, TX 78753 in Austin, Texas. The project has an estimated value of $100K covering 1,000 sq ft. Harris Ridge 1 HP - Daniel Garcia (Property Manager) is the property owner and Forge Craft Architecture + Design is the design firm of record. The project was registered with TDLR on August 11, 2021.
❓Frequently Asked Questions
What is Acutronic Test Cell and Office?
Acutronic Test Cell and Office is a renovation/alteration project at 1100 E Howard Lane, Suite 100 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Expansion of preexisting office space and build out of test cell for small turbine engine (additions to the building are <1,000 square feet).
Is Acutronic Test Cell and Office open in Austin?
Construction on Acutronic Test Cell and Office is complete — TDLR records show the project passed its required accessibility inspection in Dec 2021. The building is finished and very likely open.
Where is Acutronic Test Cell and Office located?
Acutronic Test Cell and Office is located at 1100 E Howard Lane, Suite 100, Austin, TX, 78753, in Travis County.
Who is the owner or developer of Acutronic Test Cell and Office?
Harris Ridge 1 HP - Daniel Garcia (Property Manager) is the property owner/developer of record for Acutronic Test Cell and Office, per its TDLR project registration.
Who is the architect or design firm for Acutronic Test Cell and Office?
Forge Craft Architecture + Design is the design firm of record for Acutronic Test Cell and Office, according to its TDLR filing.
How much does Acutronic Test Cell and Office cost and how big is it?
Acutronic Test Cell and Office has an estimated construction value of $100K and approximately 1,000 square feet (about $100/sqft), based on its TDLR filing.
📋Scope of Work
Expansion of preexisting office space and build out of test cell for small turbine engine (additions to the building are <1,000 square feet).
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Aug 11, 2021
Review Complete
Inspection Complete
Closed
Dec 31, 2021
🔗Related Projects
📄Related City Permits
Building permits found at or near this location
200amp underground service upgrade
Replacement of complete existing central heat and air system with or without duct work Replacement of HVAC system.
New 2-story single family residence 3 bedrooms/2.5 bathrooms attached garage with covered porch and patio
Retaining wall review for multiple single-family residential lots. Walls permitted under Subdivision plans: Saddle Ridge at Wildhorse Ranch Section 1 - Takedown 1 3-8
New construction of 2 story sfr with 4 beds 3.5 baths attached 2 car garage covered patio