Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Siemens

8600 N. Royal Lane, Suite 100A, Irving, TX 75063, Irving, TX, 75063

Siemens is a renovation/alteration project at 8600 N. Royal Lane, Suite 100A, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $850K across about 18,436 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2021023138

$850K

Project Value

18,436

Square Feet

$46/sqft

Cost/SqFt

3 months

Duration

Registered:Aug 30, 2021

Start:Aug 31, 2021

Target:Nov 30, 2021

📝

Review Complete

Design review complete, construction may proceed

Siemens is a Renovation/Alteration project located at 8600 N. Royal Lane, Suite 100A, Irving, TX 75063 in Irving, Texas. The project has an estimated value of $850K covering 18,436 sq ft. Blue Ridge Industrial is the property owner and GSC Architects is the design firm of record. The project was registered with TDLR on August 30, 2021.

❓Frequently Asked Questions

What is Siemens?

Siemens is a renovation/alteration project at 8600 N. Royal Lane, Suite 100A in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Partial floor tenant improvement including selective demolition, partition, electrical, plumbing, ceiling, finishes, and life safety.

Is Siemens open in Irving?

Siemens is currently under construction in Irving, TX. Its current TDLR status is "Review Complete".

Where is Siemens located?

Siemens is located at 8600 N. Royal Lane, Suite 100A, Irving, TX, 75063, in Dallas County.

Who is the owner or developer of Siemens?

Blue Ridge Industrial is the property owner/developer of record for Siemens, per its TDLR project registration.

Who is the architect or design firm for Siemens?

GSC Architects is the design firm of record for Siemens, according to its TDLR filing.

How much does Siemens cost and how big is it?

Siemens has an estimated construction value of $850K and approximately 18,436 square feet (about $46/sqft), based on its TDLR filing.

📋Scope of Work

Partial floor tenant improvement including selective demolition, partition, electrical, plumbing, ceiling, finishes, and life safety.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.