Construction complete · Dec 2021🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

BSW Temple Enable

2401 South 31st Street, Temple, TX 76508, Temple, TX, 76508

BSW Temple Enable is a renovation/alteration project at 2401 South 31st Street, Temple, in Bell County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2021). The project has an estimated value of $330K across about 1,550 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2022000280

$330K

Project Value

1,550

Square Feet

$213/sqft

Cost/SqFt

2 months

Duration

Registered:Sep 4, 2021

Start:Oct 1, 2021

Target:Dec 1, 2021

🏁

Project Closed

Project has been completed and closed

BSW Temple Enable is a Renovation/Alteration project located at 2401 South 31st Street, Temple, TX 76508 in Temple, Texas. The project has an estimated value of $330K covering 1,550 sq ft. Victor Arrieta- BSW Health is the property owner and PAGE/ is the design firm of record. The project was registered with TDLR on September 4, 2021.

❓Frequently Asked Questions

What is BSW Temple Enable?

BSW Temple Enable is a renovation/alteration project at 2401 South 31st Street in Temple, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: IS office area. Storage Room. OT open office with Breakroom area.

Is BSW Temple Enable open in Temple?

Construction on BSW Temple Enable is complete — TDLR records show the project passed its required accessibility inspection in Dec 2021. The building is finished and very likely open.

Where is BSW Temple Enable located?

BSW Temple Enable is located at 2401 South 31st Street, Temple, TX, 76508, in Bell County.

Who is the owner or developer of BSW Temple Enable?

Victor Arrieta- BSW Health is the property owner/developer of record for BSW Temple Enable, per its TDLR project registration.

Who is the architect or design firm for BSW Temple Enable?

PAGE/ is the design firm of record for BSW Temple Enable, according to its TDLR filing.

How much does BSW Temple Enable cost and how big is it?

BSW Temple Enable has an estimated construction value of $330K and approximately 1,550 square feet (about $213/sqft), based on its TDLR filing.

📋Scope of Work

IS office area. Storage Room. OT open office with Breakroom area.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.