Construction complete · Oct 2022🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Closner Equipment

21910 FM 2252, Schertz, TX 78154, Schertz, TX, 78154

Closner Equipment is a new construction project at 21910 FM 2252, Schertz, in Comal County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Oct 2022). The project has an estimated value of $1.2M across about 7,200 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2022006088

$1.2M

Project Value

7,200

Square Feet

$167/sqft

Cost/SqFt

10 months

Duration

Registered:Nov 24, 2021

Start:Jan 18, 2022

Target:Oct 31, 2022

🏁

Project Closed

Project has been completed and closed

Closner Equipment is a New Construction project located at 21910 FM 2252, Schertz, TX 78154 in Schertz, Texas. The project has an estimated value of $1.2M covering 7,200 sq ft. Closner Equipment is the property owner and Zimmerman Architecture, Inc. is the design firm of record. The project was registered with TDLR on November 24, 2021.

❓Frequently Asked Questions

What is Closner Equipment?

Closner Equipment is a new construction project at 21910 FM 2252 in Schertz, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 7,200 sf Warehouse w/ Small Office and 3,150 Work Canopy. site work, slab, building, finish out, plumbing, electrical, HVAC

Is Closner Equipment open in Schertz?

Construction on Closner Equipment is complete — TDLR records show the project passed its required accessibility inspection in Oct 2022. The building is finished and very likely open.

Where is Closner Equipment located?

Closner Equipment is located at 21910 FM 2252, Schertz, TX, 78154, in Comal County.

Who is the owner or developer of Closner Equipment?

Closner Equipment is the property owner/developer of record for Closner Equipment, per its TDLR project registration.

Who is the architect or design firm for Closner Equipment?

Zimmerman Architecture, Inc. is the design firm of record for Closner Equipment, according to its TDLR filing.

How much does Closner Equipment cost and how big is it?

Closner Equipment has an estimated construction value of $1.2M and approximately 7,200 square feet (about $167/sqft), based on its TDLR filing.

📋Scope of Work

7,200 sf Warehouse w/ Small Office and 3,150 Work Canopy. site work, slab, building, finish out, plumbing, electrical, HVAC

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.