Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Cedar Valley Industrial Park

1032 Cedar Valley Drive, Lancaster, TX 75146, Lancaster, TX, 75146

Cedar Valley Industrial Park is a new construction project at 1032 Cedar Valley Drive, Lancaster, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $3.5M across about 48,500 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2022013301

$3.5M

Project Value

48,500

Square Feet

$72/sqft

Cost/SqFt

1y 3mo

Duration

Registered:Mar 4, 2022

Start:May 1, 2022

Target:Aug 1, 2023

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Cedar Valley Industrial Park is a New Construction project located at 1032 Cedar Valley Drive, Lancaster, TX 75146 in Lancaster, Texas. The project has an estimated value of $3.5M covering 48,500 sq ft. HSM Cedar Valley, LP is the property owner and KHArchitects is the design firm of record. The project was registered with TDLR on March 4, 2022.

❓Frequently Asked Questions

What is Cedar Valley Industrial Park?

Cedar Valley Industrial Park is a new construction project at 1032 Cedar Valley Drive in Lancaster, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New construction of a 48,560 sf spec building for multi-tenant industrial use w/one Office finish-out of a 1,500 of space, (future tenant office finish-outs by separate permit). The residual is open warehouse space.

Is Cedar Valley Industrial Park open in Lancaster?

Cedar Valley Industrial Park is currently under construction in Lancaster, TX. Its current TDLR status is "Project Registered".

Where is Cedar Valley Industrial Park located?

Cedar Valley Industrial Park is located at 1032 Cedar Valley Drive, Lancaster, TX, 75146, in Dallas County.

Who is the owner or developer of Cedar Valley Industrial Park?

HSM Cedar Valley, LP is the property owner/developer of record for Cedar Valley Industrial Park, per its TDLR project registration.

Who is the architect or design firm for Cedar Valley Industrial Park?

KHArchitects is the design firm of record for Cedar Valley Industrial Park, according to its TDLR filing.

How much does Cedar Valley Industrial Park cost and how big is it?

Cedar Valley Industrial Park has an estimated construction value of $3.5M and approximately 48,500 square feet (about $72/sqft), based on its TDLR filing.

📋Scope of Work

New construction of a 48,560 sf spec building for multi-tenant industrial use w/one Office finish-out of a 1,500 of space, (future tenant office finish-outs by separate permit). The residual is open warehouse space.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.