Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

US 69 & SAN ANTONIO ST.

598 S JACKSON ST, Jacksonville, TX 75766, Jacksonville, TX, 75766

US 69 & SAN ANTONIO ST. is a new construction project at 598 S JACKSON ST, Jacksonville, in Cherokee County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $350K across about 1,790 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2022018673

$350K

Project Value

1,790

Square Feet

$196/sqft

Cost/SqFt

3 months

Duration

Registered:May 10, 2022

Start:Jul 8, 2022

Target:Sep 29, 2022

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

US 69 & SAN ANTONIO ST. is a New Construction project located at 598 S JACKSON ST, Jacksonville, TX 75766 in Jacksonville, Texas. The project has an estimated value of $350K covering 1,790 sq ft. LADERA SCP is the property owner and CR architecture + design is the design firm of record. The project was registered with TDLR on May 10, 2022.

❓Frequently Asked Questions

What is US 69 & SAN ANTONIO ST.?

US 69 & SAN ANTONIO ST. is a new construction project at 598 S JACKSON ST in Jacksonville, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: TENANT BUILD WITHIN NEW SHELL BUILDING TO INCLUDE: NEW INTERIOR PARTITIONS, EQUIPMENT, FIXTURES, FINISHES, NEW DRIVE-THRU EQUIPMENT, RESTROOMS AND NEW EXTERIOR PATIO FURNITURE.

Is US 69 & SAN ANTONIO ST. open in Jacksonville?

US 69 & SAN ANTONIO ST. is currently under construction in Jacksonville, TX. Its current TDLR status is "Project Registered".

Where is US 69 & SAN ANTONIO ST. located?

US 69 & SAN ANTONIO ST. is located at 598 S JACKSON ST, Jacksonville, TX, 75766, in Cherokee County.

Who is the owner or developer of US 69 & SAN ANTONIO ST.?

LADERA SCP is the property owner/developer of record for US 69 & SAN ANTONIO ST., per its TDLR project registration.

Who is the architect or design firm for US 69 & SAN ANTONIO ST.?

CR architecture + design is the design firm of record for US 69 & SAN ANTONIO ST., according to its TDLR filing.

How much does US 69 & SAN ANTONIO ST. cost and how big is it?

US 69 & SAN ANTONIO ST. has an estimated construction value of $350K and approximately 1,790 square feet (about $196/sqft), based on its TDLR filing.

📋Scope of Work

TENANT BUILD WITHIN NEW SHELL BUILDING TO INCLUDE: NEW INTERIOR PARTITIONS, EQUIPMENT, FIXTURES, FINISHES, NEW DRIVE-THRU EQUIPMENT, RESTROOMS AND NEW EXTERIOR PATIO FURNITURE.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.