Construction complete · Feb 2023🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Martin UAV

NE Corner of Gateway Dr. & Corporate Dr., Frisco, TX 75034, Frisco, TX, 75034

Martin UAV is a new construction project at NE Corner of Gateway Dr. & Corporate Dr., Frisco, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2023). The project has an estimated value of $3.0M across about 106,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2022021290

$3.0M

Project Value

106,000

Square Feet

$28/sqft

Cost/SqFt

7 months

Duration

Registered:Jun 13, 2022

Start:Jul 4, 2022

Target:Feb 1, 2023

🏁

Project Closed

Project has been completed and closed

Martin UAV is a New Construction project located at NE Corner of Gateway Dr. & Corporate Dr., Frisco, TX 75034 in Frisco, Texas. The project has an estimated value of $3.0M covering 106,000 sq ft. Denali Texas 16240 Gateway Industrial, LLC is the property owner and Alliance Architects, Inc. is the design firm of record. The project was registered with TDLR on June 13, 2022.

❓Frequently Asked Questions

What is Martin UAV?

Martin UAV is a new construction project at NE Corner of Gateway Dr. & Corporate Dr. in Frisco, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Tenant finish-out of shell building

Is Martin UAV open in Frisco?

Construction on Martin UAV is complete — TDLR records show the project passed its required accessibility inspection in Feb 2023. The building is finished and very likely open.

Where is Martin UAV located?

Martin UAV is located at NE Corner of Gateway Dr. & Corporate Dr., Frisco, TX, 75034, in Collin County.

Who is the owner or developer of Martin UAV?

Denali Texas 16240 Gateway Industrial, LLC is the property owner/developer of record for Martin UAV, per its TDLR project registration.

Who is the architect or design firm for Martin UAV?

Alliance Architects, Inc. is the design firm of record for Martin UAV, according to its TDLR filing.

How much does Martin UAV cost and how big is it?

Martin UAV has an estimated construction value of $3.0M and approximately 106,000 square feet (about $28/sqft), based on its TDLR filing.

📋Scope of Work

Tenant finish-out of shell building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.