Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Northern Tool + Equipment

208 N. Central Expressway 208 N. Central Expressway, Mckinney, TX 44122, Mckinney, TX, 44122

Northern Tool + Equipment is a renovation/alteration project at 208 N. Central Expressway 208 N. Central Expressway, Mckinney, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $650K across about 23,211 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2022024750

$650K

Project Value

23,211

Square Feet

$28/sqft

Cost/SqFt

3 months

Duration

Registered:Jul 27, 2022

Start:Sep 1, 2022

Target:Dec 1, 2022

📝

Review Complete

Design review complete, construction may proceed

Northern Tool + Equipment is a Renovation/Alteration project located at 208 N. Central Expressway 208 N. Central Expressway, Mckinney, TX 44122 in Mckinney, Texas. The project has an estimated value of $650K covering 23,211 sq ft. JAH Realty, LP is the property owner and Onyx Creative is the design firm of record. The project was registered with TDLR on July 27, 2022.

❓Frequently Asked Questions

What is Northern Tool + Equipment?

Northern Tool + Equipment is a renovation/alteration project at 208 N. Central Expressway 208 N. Central Expressway in Mckinney, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Phase 2- Interior Tenant fit-out for Retail tenant Northern Tool +Equipment

Is Northern Tool + Equipment open in Mckinney?

Northern Tool + Equipment is currently under construction in Mckinney, TX. Its current TDLR status is "Review Complete".

Where is Northern Tool + Equipment located?

Northern Tool + Equipment is located at 208 N. Central Expressway 208 N. Central Expressway, Mckinney, TX, 44122, in Collin County.

Who is the owner or developer of Northern Tool + Equipment?

JAH Realty, LP is the property owner/developer of record for Northern Tool + Equipment, per its TDLR project registration.

Who is the architect or design firm for Northern Tool + Equipment?

Onyx Creative is the design firm of record for Northern Tool + Equipment, according to its TDLR filing.

How much does Northern Tool + Equipment cost and how big is it?

Northern Tool + Equipment has an estimated construction value of $650K and approximately 23,211 square feet (about $28/sqft), based on its TDLR filing.

📋Scope of Work

Phase 2- Interior Tenant fit-out for Retail tenant Northern Tool +Equipment

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.