Under construction📝Review Complete🏗️ New Construction💵 This project involves public funds, public land, or is a Federally funded roadway project.

William Cannon C1

6500 - 7000 W. William Cannon Drive, Austin, TX 78744, Austin, TX, 78744

Construction50%

📊Project Metrics

TDLR #TABS2023000674

$2.7M

Project Value

1,589,330

Square Feet

$2/sqft

Cost/SqFt

9 months

Duration

Registered:Sep 12, 2022

Start:Feb 10, 2023

Target:Nov 7, 2023

📝

Review Complete

Design review complete, construction may proceed

William Cannon C1 is a New Construction project located at 6500 - 7000 W. William Cannon Drive, Austin, TX 78744 in Austin, Texas. The project has an estimated value of $2.7M covering 1,589,330 sq ft. City of Austin - Corridor Program Office is the property owner and CP&Y (an STV Company) is the design firm of record. The project was registered with TDLR on September 12, 2022.

❓Frequently Asked Questions

What is William Cannon C1?

William Cannon C1 is a new construction project at 6500 - 7000 W. William Cannon Drive, Austin, TX 78744 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Design and installation of including but not limited to: bike barrier, ADA compliant pedestrian ramps, bicycle ramps, proposed sidewalk, proposed shared-use-paths, proposed curb and gutter, and appropriate signing and striping.

Is William Cannon C1 open in Austin?

William Cannon C1 is currently under construction in Austin, TX. Its current TDLR status is "Review Complete".

Where is William Cannon C1 located?

William Cannon C1 is located at 6500 - 7000 W. William Cannon Drive, Austin, TX 78744, Austin, TX, 78744, in Travis County.

Who is the owner or developer of William Cannon C1?

City of Austin - Corridor Program Office is the property owner/developer of record for William Cannon C1, per its TDLR project registration.

Who is the architect or design firm for William Cannon C1?

CP&Y (an STV Company) is the design firm of record for William Cannon C1, according to its TDLR filing.

How much does William Cannon C1 cost and how big is it?

William Cannon C1 has an estimated construction value of $2.7M and approximately 1,589,330 square feet (about $2/sqft), based on its TDLR filing.

📋Scope of Work

Design and installation of including but not limited to: bike barrier, ADA compliant pedestrian ramps, bicycle ramps, proposed sidewalk, proposed shared-use-paths, proposed curb and gutter, and appropriate signing and striping.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.