Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Wingstop

10510 FM 1464 Suite 400, Richmond, TX 77407, Richmond, TX, 77407

Wingstop is a renovation/alteration project at 10510 FM 1464 Suite 400, Richmond, in Fort Bend County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $175K across about 1,785 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2023014953

$175K

Project Value

1,785

Square Feet

$98/sqft

Cost/SqFt

2 months

Duration

Registered:Mar 24, 2023

Start:May 1, 2023

Target:Jul 1, 2023

📝

Review Complete

Design review complete, construction may proceed

Wingstop is a Renovation/Alteration project located at 10510 FM 1464 Suite 400, Richmond, TX 77407 in Richmond, Texas. The project has an estimated value of $175K covering 1,785 sq ft. KM 1464 Partners II LLP is the property owner and Wilkus Architects is the design firm of record. The project was registered with TDLR on March 24, 2023.

❓Frequently Asked Questions

What is Wingstop?

Wingstop is a renovation/alteration project at 10510 FM 1464 Suite 400 in Richmond, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Tenant finish out of an existing shell building. Work includes new walls, finishes, restrooms, mechanical equipment, and plumbing/electrical rough-ins for new equipment. There will be no exterior work.

Is Wingstop open in Richmond?

Wingstop is currently under construction in Richmond, TX. Its current TDLR status is "Review Complete".

Where is Wingstop located?

Wingstop is located at 10510 FM 1464 Suite 400, Richmond, TX, 77407, in Fort Bend County.

Who is the owner or developer of Wingstop?

KM 1464 Partners II LLP is the property owner/developer of record for Wingstop, per its TDLR project registration.

Who is the architect or design firm for Wingstop?

Wilkus Architects is the design firm of record for Wingstop, according to its TDLR filing.

How much does Wingstop cost and how big is it?

Wingstop has an estimated construction value of $175K and approximately 1,785 square feet (about $98/sqft), based on its TDLR filing.

📋Scope of Work

Tenant finish out of an existing shell building. Work includes new walls, finishes, restrooms, mechanical equipment, and plumbing/electrical rough-ins for new equipment. There will be no exterior work.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.